Coupler Lock for Demco Trailer Coupler DM14976-52

Question

Question:

I have a DM14976-52 and am interested in a coupler lock. I know that there are bolt trailer coupler locks, however I would prefer a coupler lock that would be similar to BLTL-20. Thank you

asked by: Josh

0

Expert Reply:

The most similar coupler lock we have to the # BLTL-20 that would fit the Demco coupler # DM14976-52 would be the Fastway part # FA86-0015-316 which fits into the coupler and has a bar that runs across the top of it but since it has a little more universal of a design it can fit the Demco.

expert reply by: Jameson C

0

Answer 1

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

view full answer...

Answer 2

Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…

view full answer...

Answer 3

To be able to lock the latch on the Demco Trailer Coupler - Adjustable Channel Mount #DM14976-52 you were looking at I recommend the Bulldog Easy Access Coupler Lock #BD580409.

view full answer...

Answer 4

The Demco Trailer Coupler #DM14976-52 has a 5/16" hole through the side of the coupler that will accept a lock. Our etrailer Surge Brake Coupler Lock #e98888 will allow you to prevent the coupler from being disconnected easily from your coupler.…

view full answer...

Answer 5

We sure can! The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.

view full answer...

Answer 6

The Ultra-Fab #UF21-001095 wheel chocks are made in China. If you'd prefer a chock manufactured in the US, I'd recommend the #337WC24483 from Buyers Products. If you click the provided link, you can see a video of my buddy Randy demonstrating…

view full answer...

Answer 7

Hi Ed, If I'm understanding you correctly your trailer's frame is 3" wide and the coupler needs to have a 2" ball. If so the Demco Channel Tongue Trailer Coupler #DM15000-52 you were looking at would be a compatible fit. I've…

view full answer...

Answer 8

The only difference between the Demco Channel Tongue Trailer Coupler part #12564 and Demco Channel Tongue Trailer Coupler part #DM12717 is the bolt pattern which is just slightly different with one having an extra hole.

view full answer...

Answer 9

You can lock out your surge brake actuator although it's not always the prettiest of solutions. You need to either weld the pieces together or drill holes through it putting in bolts to keep it from moving. It'll work but it completely…

view full answer...

Coupler Lock for Demco Trailer Coupler DM14976-52

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching