Replacement for Power Gear Slide Out Motor 522176

Question

Question:

Hi I have a 2005 f53 ford with a living room slide, I need to replace the motor I belive its a lippert power gera 522176 original part 0404003448 or 6 CANT TELL need to find out which motor will work it has a 2 rail electric drive thanks

asked by: Jeff G

0

Expert Reply:

The correct replacement for a Power Gear Slide Out Motor 522176 is the Replacement Slide-Out Motor Assembly part # LC383745. It has the dual output shafts as well.

expert reply by: Conner L

0

Answer 1

From what I was able to find, the Power Gear 522176 was actually the direct replacement for the Power Gear 523983. What I can confirm is that the Lippert 383745 you mentioned is the same motor (just with a different part number) as the 522176, and we…

view full answer...

Answer 2

The correct replacement for your Power Gear 522176 is #LC383745.

view full answer...

Answer 3

The replacement motor you need for your Tiffin part #8730 is the Lippert Replacement Gear Motor Assembly #LC383745 .

view full answer...

Answer 4

Sure thing! The correct replacement motor for your 2003 Fleetwood Southwind 32V is the: -Replacement Gear Motor Assembly for Lippert Electric Slide-Out #LC386327.

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Replacement for Power Gear Slide Out Motor 522176

Product Page this Question was Asked From

Continue Researching