Low Profile Roof Rack For 2019 Hyundai Kona With Flush Rails

Question

Question:

Hello. I have a 2019 hyundai kona with flush rails and Im looking to add crossbars to support a rooftop tent. Ideally, Im looking for cross bars that are as low profile as possible.

asked by: Michael W

0

Expert Reply:

This Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 is definitely going to be your best option. The RCL Legs # RRRCL4 mount to your fixed points on your 2019 Hyundai Kona. You'll want to get the Rear Wedges # RRSUB0671 and the Custom RCP Fit Kit # RR66QJ. These are only going to sit up a couple inches from your roof rails and will work great with your roof top tent # TH8001KSK04. I've included a video of an installation to help you with the install!

expert reply by: Adam E

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

We have a variety of roof rack solutions for the bare roof on your 2024 Chevy Equinox, and for your application I recommend the Rhino-Rack ROC25: - Rhino-Rack ROC25 Roof Rack for Naked Roofs #RR53TR This uses clamps on your door jambs but it has the…

view full answer...

Answer 7

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 8

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Low Profile Roof Rack For 2019 Hyundai Kona With Flush Rails

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching