THIS ITEM IS NOT A FIT FOR
2019 Ford F-250 Super Duty
Rear Wedges for Rhino-Rack Roof Rack Legs - 8.72 mm - Qty 2
Item # RRSUB0671
Our Price: $4.81
2019 Ford F-250 Super Duty
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (8)
- Q & A (0)
- Videos (1)
- Photos
Rhino Rack Accessories and Parts - RRSUB0671
- Roof Rack
- Hardware
- Tower Parts
- Wedges
- Rhino Rack
8.72-mm Rear wedge installs on bottom of Rhino-Rack roof rack legs to help level the crossbars or Pioneer platform on the roof of your vehicle.
Features:
- Install on bottom of Rhino-Rack roof rack legs (sold separately)
- Provide level mounting surface for crossbars or a Pioneer platform
- Includes 2 wedges
Specs:
- Wedge thickness: 8.72 mm
- 5-Year limited warranty
SUB0671 Rear Wedges for Rhino-Rack Roof Rack Legs - 8.72 mm - Qty 2
Installation Details
Video of Rear Wedges for Rhino-Rack Roof Rack Legs - 8.72 mm - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Rhino Rack - Roof Rack - RRSUB0671
Today we're taking a look at the wedges for Rhino Rack Roof Rag legs. These install on the bottom of your Rhino Rack Roof Rack legs. They simply provide a level mounting surface for cross bars or a pioneer platform rack. Two wedges are included. They're made from a durable black plastic construction. It is a direct part from the manufacturer, from Rhino Rack, and the wedge thickness is 8.72 millimeters.
Again, both are included. Two wedges. That's going to do it for today's look at the rear wedges for Rhino Rack Roof Rack legs.
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Rear Wedges for Rhino-Rack Roof Rack Legs - 8.72 mm - Qty 2 - RRSUB0671
Average Customer Rating: 4.8 out of 5 stars (8 Customer Reviews)
8.72-mm Rear wedge installs on bottom of Rhino-Rack roof rack legs to help level the crossbars or Pioneer platform on the roof of your vehicle.by: Edward05/26/2022
Hyundai
Finally finished my Rhino-rack roof rack install on my 2022 Hyundai Kona. I had problems understanding confusing directions and found out after calling and sending a video that there were wedges missing from my original shipment. I thought the bolts were too long only because pieces were missing. I thank Wayne from customer service for helping me figure this out and shipping them out next day air. I am happy with the install and they are sturdy and high quality. Just think they should make directions easier to understand. Happy customer just in time as we are planning a vacation starting tomorrow night to the beach! Good job etrailer.com!
by: Michael05/06/2022
by: Geremy08/26/2021
by: Roger 11/07/2021
by: Lyn 03/06/2023
by: Jamyang04/15/2021
by: Barry 03/31/2023
by: Robert 06/28/2021
8
8
See what our Experts say about this Rhino Rack Accessories and Parts
- Height of Rhino-Rack Vortex Roof Rack for 2022 Hyundai Kona with Factory RailsThe Vortex Aero crossbar system is going to add about 3-1/2" - 4" to the height of your 2022 Hyundai Kona on tp of those factory rails. Here are the parts you'll need for this system: 49" Vortex Aero Crossbars - # RRVA126B-2 RCL Legs - # RRRCL4 Rear Wedges - # RRSUB0671 RCP Fit Kit - # RR66QJ If you let me know what you plan on using the roof rack for I'd be more than happy to make any other recommendations you might need!
view full answer... - Recommended Roof Rack for a 2023 Mazda CX-9 w/ Side RailsYes, there is a set of crossbars that will fit the factory side rails of your 2023 Mazda CX-9. These mount directly to the side rails and will have more than enough capacity for a bike rack or cargo box. You will want the roof rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 item # RRVA126B-2 RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points - Qty 4 item # RRRCL4 Rear Wedges for...
view full answer...
- Roof Rack and Assisted Paddleboard Carrier Recommendation 2019 Honda HR-V with Flush RailsThule did completely change their roof rack designs recently so there definitely isn't a way to adapt your old rack to fit your 2019 Honda HR-V with flush rails. The Rhino Rack RVP roof rack part # RR55QJ is a confirmed fit for your vehicle though and would be a great option unless you wanted an assisted board carrier like you mentioned. Assisted carriers need a rack that has bars that overhang past the feet of the rack like with the Rhino Rack roof rack part numbers # RRVA118S-2, # RRRCL4,...
view full answer... - What Roof Rack Utilizes the Fixed Mounting Points on My 2022 Honda HR-V with Flush Rails? I have a great roof rack solution for you. Unfortunately, through my research on your 2022 Honda HRV, I could not confirm the purpose for the 8 rubber plugs in the side of your flush rails. However, the slots on top are tabs that can be removed to access the fixed mounting points in the rails to attach roof rack systems. For the best roof rack system for your vehicle that attaches directly to the fixed mounting points, I recommend the following parts: - Rhino-Rack Vortex Aero Crossbars...
view full answer...
- Low Profile Roof Rack For 2019 Hyundai Kona With Flush RailsThis Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 is definitely going to be your best option. The RCL Legs # RRRCL4 mount to your fixed points on your 2019 Hyundai Kona. You'll want to get the Rear Wedges # RRSUB0671 and the Custom RCP Fit Kit # RR66QJ. These are only going to sit up a couple inches from your roof rails and will work great with your roof top tent # TH8001KSK04. I've included a video of an installation to help you with the install!
view full answer... - Will Malone AriFlow2 Roof Rack Fit a 2021 Hyundai TucsonIt looks like the 2021 Hyundai Tucson has flush mounted rails while the Malone AirFlow2 Roof Rack # MPG216 is designed for raised rails which means we need to go with a different roof rack system like the Rhino-Rack Vortex roof rack which uses the following parts: 46" Vortex Crossbars # RRVA118B-2 RCH Legs - # RRRCH2 RCL Legs - # RRRCL2 Rear Wedges - # RRSUB0671 Fit Kit - # RR66QJ This uses aero-style crossbars like what you were looking at with the AirFlow2 system but it comes with...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Cole B
Written by:
Daron K
Updated by:
Dawn Z
Video by:
Cooper S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.