What Are The Dimensions Of Replacement Dome For Fan-Tastic RV Roof Vent FVK1020-19

Question

Question:

What is the height of this unit FVK1020-19?

asked by: Ann

0

Expert Reply:

I confirmed with the manufacturer that the Replacement Dome for Fan-Tastic RV Roof Vents # FVK1020-19 measures 15" long, 15" wide, and 3-1/4" tall. I have attached a demonstration video and diagram for this product.

expert reply by: Andrew N

0

Dome Dimensions
(click to enlarge)

Answer 1

We do have exactly what you need, as I was able to verify the correct replacement lid in Smoke color for your Fan-Tastic Vent model LF4000R; the correct part is the following: - Replacement Dome for Fan-Tastic Vent RV Roof Vents #FVK1020-19 You…

view full answer...

Answer 2

By "slider track" I believe you are referencing the hinge; if you take a look at the accompanying photo you should be able to see what I am talking about. That should be what your Fan-Tastic vent has and since your model 6000A/6000BTA will…

view full answer...

Answer 3

All roof vent lids are not universal, but they are similar. We do offer Camco, Valterra, VentLine, and MaxxAir roof vents; but the main thing to pay attention to is the type of hinge for your roof vent has. There are 3 point hinges, 4 point hinges,…

view full answer...

Answer 4

We do have one replacement dome from Fan-Tastic Vent available with part #FVK1020-19. This smoke-colored dome lid measures 15 inches x 14-7/8 inches and features a long piano-style hinge. Take a look at the picture I have attached to see if the hinge…

view full answer...

Answer 5

Based on previous information the most likely vent lids that fit your Fan-Tastic Vent 6000A have hinges and measure nearly 15 inches from outside to outside, but there isn't any that are smoke in color, just tinted (which would be the closest to…

view full answer...

Answer 6

The Replacement Dome for Fan-Tastic Vent RV Roof Vents #FVK1020-19 that you referenced measures 14-13/16 inches from the hinged side to the opposite side (tall) and then 14-13/16 inches from side to side (wide). I have attached a picture for…

view full answer...

Answer 7

We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is to go by…

view full answer...

Answer 8

RV manufacturers will typically just turn the handle 180 degrees for other orientation and the deadbolt will just be on the opposite side of the plunger. If your deadbolt sits above the plunger on yours and the cutout hole is 2-1/2" to 3"…

view full answer...

Answer 9

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 10

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 11

We do have the BP 12 ETP you are looking for with the part #BA64FR.

view full answer...

Answer 12

I have some great replacement RV door latch options. The only one we offer that would come close to fitting such a large cutout is the Bauer Products Camper Door Lock part #BA65FR which fits up to 5-1/4" wide x 4-1/2" tall openings so…

view full answer...

What Are The Dimensions Of Replacement Dome For Fan-Tastic RV Roof Vent FVK1020-19

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching