Replacement Lid for Fan-Tastic Vent 12V Fan

Question

Question:

I have a 12 volt fan tastic that needs a neww led Model #8100M date 8-02 The RV is a National Islander year 2003 what led # should I order?

asked by: Leo M

1

Helpful Expert Reply:

We do have one replacement dome from Fan-Tastic Vent available with part # FVK1020-19. This smoke-colored dome lid measures 15 inches x 14-7/8 inches and features a long piano-style hinge.

Take a look at the picture I have attached to see if the hinge style matches what you currently have. If the hinge style is the same, this replacement lid will fit and work well on your Fan-Tastic Vent 12V Fan.

expert reply by: Chris R

1

click to enlarge

Answer 1

All roof vent lids are not universal, but they are similar. We do offer Camco, Valterra, VentLine, and MaxxAir roof vents; but the main thing to pay attention to is the type of hinge for your roof vent has. There are 3 point hinges, 4 point hinges,…

view full answer...

Answer 2

We do have exactly what you need, as I was able to verify the correct replacement lid in Smoke color for your Fan-Tastic Vent model LF4000R; the correct part is the following: - Replacement Dome for Fan-Tastic Vent RV Roof Vents #FVK1020-19 You…

view full answer...

Answer 3

The replacement dome part number you are looking for is #FVK1020-19. This will fit the Fan-tastic Vent Model 2000TRS with Rain Sensor. I have linked it to this page for your convenience.

view full answer...

Answer 4

The Replacement Dome for Fan-Tastic Vent RV Roof Vents #FVK1020-19 that you referenced measures 14-13/16 inches from the hinged side to the opposite side (tall) and then 14-13/16 inches from side to side (wide). I have attached a picture for…

view full answer...

Answer 5

I confirmed with the manufacturer that the Replacement Dome for Fan-Tastic RV Roof Vents #FVK1020-19 measures 15" long, 15" wide, and 3-1/4" tall. I have attached a demonstration video and diagram for this product.

view full answer...

Answer 6

Take a look at the hinge in the picture of the vent lid part #FVK1020-19 that you referenced. If yours matches that design this would be the correct hinge for your trailer. This does have an overall length and width of 15 inch by 15 inch.

view full answer...

Answer 7

So you're needing a smoke colored vent lid like #FVK1020-19, but with a different hinge, is that correct? Most of the Ventline/Northern Breeze fans used a continuous hinge, like what's seen on the #BBC-0530-04. I've provided a photo…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Replacement Lid for Fan-Tastic Vent 12V Fan

Product Page this Question was Asked From

Continue Researching