Front Mount Hitch Fit for 2021 Ford F-350 Dual Rear Wheel

Question

Question:

I see some say does not fit dually . I have a 2021 f350 daully which front receivers fit it?

asked by: Tim C

1

Helpful Expert Reply:

The Draw-Tite # 65076 front mounted receiver is compatible with all models of the 2021 Ford F-350, including DRW models, according to Draw-Tite. The Curt # C31078 isn't a fit for DRW models.

I've linked to an installation video that you might find helpful.

expert reply by: Mike L

1

Answer 1

We have received a review from someone who purchased the SuperSprings SuperSway Stops #SS65GR for his 2022 Ford F-350 Super Duty and said they fit without issue. I do know these do require you to have leaf springs which have the upper overload…

view full answer...

Answer 2

Thank you for all of the information! I definitely have some recommendations for you but I do encourage you to get that OEM suspension looked at especially if you think it used to look different prior to your last trip. Any suspension enhancement…

view full answer...

Answer 3

The EcoHitch Hidden Front Mount Trailer Hitch Receiver part #EH83GR is a confirmed fit for a 2022 Ford F-350 Diesel Dually and what I recommend using. It installs just slightly below the front bumper in the lower valence so there will be some minor…

view full answer...

Answer 4

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

view full answer...