Availability of 16 inch Trailer Wheel that is Aluminum and Has 8 Lug Bolt Pattern

Question

Question:

Looking for 16 inch eight lug trailer rims aluminum

asked by: Doug

0

Expert Reply:

I attached a page to all of the 16 inch trailer wheels we offer with an 8 lug bolt pattern since we have so many. My favorite is probably the # LH39FR if you like black and silver wheels or for a more traditional aluminum wheel we have the mod wheel part # LHJM513.

expert reply by: Jameson C

0

Answer 1

Trailer wheels like the Aluminum Modular Trailer Wheel - 16" x 7" Rim - 8 on 6-1/2 - Silver #LHJM513 you referenced are not rated for a psi. Many wheel assemblies come with a valve stem rated for 65 psi or 80 psi at most. However, when a…

view full answer...

Answer 2

I have a solution for you, but I did some searching and it doesn't look like we have any available center caps that are going to be compatible with the Dexstar Steel Mini Mod Trailer Wheel #AM20794. If you're looking for a little bit better…

view full answer...

Answer 3

Looks like it's time to replace. Here is a good looking Aluminum Black & Silver Rim #LH39FR. 16" wheel 6" wide and has an 8 on 6-1/2 bolt pattern!

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 12

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Availability of 16 inch Trailer Wheel that is Aluminum and Has 8 Lug Bolt Pattern

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching