Replacement Circuit Board for MaxxFan 00-4000K

Question

Question:

The manufacturer specified part number 10b21276k, which is very similar to your part, will it work on my fan which is a max air 00-04000k

asked by: Steven E

0

Expert Reply:

Since you have the MaxxFan model 00-4000K the correct circuit board replacement part number from us is the part # MA10A21276K.

expert reply by: Jameson C

0

Answer 1

Its very likely you do need just a new circuit board for your Maxxfan Deluxe which would require the part #MA10A21276K that you referenced. You troubleshooted that everything has power like it should so that eliminates the problem to being the…

view full answer...

Answer 2

You reported that you cannot use the remote on your MaxxFan 4700K to put the vent cover up and down. Let's troubleshoot. Put some new batteries in your remote. Ensure that the display comes on. Verify if your vent cover now works. Verify if…

view full answer...

Answer 3

It sounds like your MaxxFan may need a new circuit board. Typically, when customers had similar issues they were able to replace the circuit board and their fan return back to normal operation. You can use Replacement Printed Circuit Board…

view full answer...

Answer 4

The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…

view full answer...

Answer 5

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

Answer 6

The 10B21275KE part #MA39FR replaces the 10-21275KE you mentioned as well so if you had an older model number you could use it in same application.

view full answer...

Answer 7

The replacement printed circuit board for your MaxxFan Delux Item #MA00-07500K is Item #MA10A21275K.

view full answer...

Answer 8

For a replacement circuit board you can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. We have confirmed with MaxxAir that this is the correct for what you have.

view full answer...

Answer 9

Thanks for reaching out! Since you have the 4951KS model MaxxFan roof vent you'll need the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. The circuit board might look slightly different as far as the pieces…

view full answer...

Answer 10

It sounds like your MaxxAir MaxxFan Trailer Roof Vent has a powered lift like #MA00-04000K but has a connection issue. It is getting power for the lid to open and close but not for the fan function. I recommend testing your wiring using a circuit…

view full answer...

Answer 11

You would measure the overall width of the trim so if it is 1 inch on the trailer now then you would want to use 1 inch trim such as #CAM25222. The good thing about this is that even if something occurred and it turns out you need 3/4 you could trim…

view full answer...

Answer 12

The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't really recommend measuring the track as they are not all a standard width. That said, we only offer vinyl…

view full answer...

Replacement Circuit Board for MaxxFan 00-4000K

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching