Installation of EchHitch 306-X7257 on 2016 Subaru WRX
Question:
Hi, I’m interested in purchasing an Invisi hitch for a 2016 Subaru WRX. While installation looks pretty straightforward, I think I’d rather have a professional handle that. Can you recommend an installer near Toluca Lake, CA 91602? Thank you for your help.
asked by: Rodolfo A
Expert Reply:
The EcoHitch # 306-X7257 will fit a 2016 Subaru WRX as long as it's equipped with the knock-out panel in the lower rear fascia.
I don't have a specific recommendation for an installer, any trusted mechanic should be able to handle the installation. In this case, the rear bumper cover/fascia needs to be temporarily removed and part of the fascia needs to be trimmed, as does some of the heat shielding. A body shop might be a better alternative, as they'd be more well versed in removal and reinstallation of these parts than an ordinary mechanic would be.
If you'll be doing some light duty towing with the hitch, you'll also need a trailer wiring harness like part # C56259, a ball mount like # C45010 and for a trailer ball, use # 19260 for a 1-7/8 or # 63845 for a 2 inch ball. You will also need a hitch pin like # PC3.
I've linked to install videos for the hitch and the wiring harness.
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Completely Hidden
- EcoHitch
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is EcoHitch Invisi Hitch Receiver Available for a 2023 Subaru WRX
- Q&A: EcoHitch Invisi Trailer Hitch Vs. Draw-Tite Class I Sportframe For 2019 Subaru WRX STI
- Q&A: Receiver Depth on EcoHitch Invisi Trailer Hitch Receiver # 306-X7257
- Q&A: Totally Hidden Trailer Hitch that Fits 2020 Subaru WRX
- Q&A: Fit of EchHitch 306-X7257 Hitch on 2017 Subaru WRX With Aftermarket Exhaust
- Q&A: Does Curt Trailer Hitch For 2022 Subaru WRX Come Out Under the Bumper or Through Bumper Cut Out
- Q&A: Availability of 2 inch Hitch for 2015 Subaru WRX
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Rooftop Cargo Carriers
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: How to Choose a Bike Rack for a Sedan or Hatchback