Will Yakima LoadWarrior load bar fit Rola roof basket?

Question

Question:

hi - can you please measure the center-to-center distance of the clamps on this bar? Id like to try this on my Rola rack, since Rola does not offer a similar product, but want to make sure I order the correct one. If this shorter bar wont fit I may try the longer bar for the Mega Warrior and cut it down - Id just like to know for sure before I order. FYI - the Rola center-to-center distance is 39.

asked by: Dave

0

Expert Reply:

For the Yakima # 8870042 LoadWarrior Load Bar, the center-on-center length is 38", and the ID of the clamp eye is 1-1/4"

For the Yakima # Y8870046 MegaWarrior Load Bar, the center-on-center length is 47" and ID of clamp eye is 1"

When making these measurements you may find it useful to have a Performance Tools # PTW80157 digital caliper.

expert reply by: Les D

0

Answer 1

Thank you for the purchase! Yes, the diameter of the tubing for the Rhino-Rack XTray Pro Cargo Basket #RRRMCB03 is 1". I confirmed this with my contact at Rhino-Rack.

view full answer...

Answer 2

The Yakima FrontLoader Wheel Mount Bike Carrier - Roof Mount part #Y02103 attaches to two crossbars so you would need two load bars on the Yakima LoadWarrior Roof Rack Cargo Basket part #Y07070. If you do not have 2 load bars you will need 2 of part…

view full answer...

Answer 3

I do have an option for you but in order to carry both a bike rack and spare tire you are going to need to go with an option that has both or else you would not have space. The Inno Shaper 80 Roof Cargo Basket is wide enough to fit your spare tire…

view full answer...

Answer 4

The Thule Telescoping Ladder for Vans - 9 Steps - 8-1/2' #TH301404 weighs 27 pounds.

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 10

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 12

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Will Yakima LoadWarrior load bar fit Rola roof basket?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching