How Short Do the Ark Drop Down Corner Jacks Compress

Question

Question:

How long are these jacks when they are collapsed shortest ? Item # AR94FR

asked by: George S

0

Expert Reply:

The Ark Drop Down Corner RV Stabilizer Jacks - 2-1/2' Long Corner Steadies - Qty 2 # AR94FR are 19" long at their shortest and extend 11" to give you up to 30" to keep your camper stable. If you were referring to the brackets and the folded up to the trailer dimensions, the brackets are approximately 5-1/2" tall.

expert reply by: Erik B

0

Answer 1

The Ark Drop Down Corner RV Stabilizer Jacks #AR94FR are definitely better than just standard scissor jacks, but the JT Strong Arm Stabilizers #LC191025 are a better option since they distribute the weight across the frame to help strengthen the…

view full answer...

Answer 2

We don't offer a combination leveler/stabilizer jack, but if you're wanting something in a stabilizer jack that is very sturdy, you can't go wrong with the ARK Drop Down Corner stabilizer jacks. They're available in a powder coat or a…

view full answer...

Answer 3

The weld-on mounting bracket for the ARK #AR94FR Drop Down Corner RV Stabilizer Jacks measures 4-5/8 x 2-7/8 inches. The bracket has holes for the hardware that attaches the jack to the brackets. The holes are 2-7/8 inches apart on center. I've…

view full answer...

Answer 4

The Ark Drop Down Corner RV Stabilizer Jacks - 2-1/2' Long Corner Steadies item #AR94FR weigh 13 lbs a piece.

view full answer...

Answer 5

The fully extended height of the Ark Drop Down Corner RV Stabilizer Jacks #AR34FR is 24". The fully retracted height is 16".

view full answer...

Answer 6

The ARK #ARK94FR stabilizer jacks could work for you, but you'll likely find they're too tall. The jacks measure 30 inches tall when fully extended or 19-1/2 inches tall when fully retracted. The existing 400914-03 jacks on your Airstream…

view full answer...

Answer 7

I had the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR measured and the distance from the center of the crank bolt to the top of the mounting flange is 2-1/2".

view full answer...

Answer 8

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Answer 9

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

view full answer...

Answer 10

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 11

The Ark stabilizers won't affect your ground clearance, but to determine the right ones that really depends on how high up your frame is off the ground. Overall, the Ark RV Stabilizer Jacks #ARK34FR are 16.6" collapsed and 23.6"…

view full answer...

Answer 12

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

view full answer...

How Short Do the Ark Drop Down Corner Jacks Compress

Product Page this Question was Asked From

Continue Researching