Adapter Plate For 2021 GMC Sierra 3500 HD SLT

Question

Question:

looking for the adapter plate for puck system 2021 gmc sierra slt 3500 HD . I have a reeese revolution fifth wheel part # 30047 and # 61516. Thank you for your help.

asked by: George K

0

Expert Reply:

Yes, we carry the Curt # C88KR adapter which is designed to pair with your 2021 GMC Sierra 3500 6-3/4 ft bed with factory puck system. The slots on the adapter will allow you to use your Reese Dual Jaw - 16,000 lbs Fifth Wheel Hitch # RP30047 as well as the Reese Revolution 61516 pin box.

expert reply by: Aaron A

0

Answer 1

Yes, the Demco 5th Wheel Rail Adapter #DM6333 will fit your 2020 GMC Sierra 2500 6-3/4' bed with OEM prep package. The adapter does have industry standard rails so your Reese 5th Wheel Trailer Hitch #RP30047 will fit to the adapter.

view full answer...

Answer 2

Thank you for the photo! The Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package #DM6333 is about 2-1/4" tall. I reached out to my contact at Demco who said that since this adapter sits on top of the pucks that height…

view full answer...

Answer 3

The Curt fifth wheel rail adapter part #C88KR is a fit for the OEM rail kit of your 2021 GMC Sierra 2500 and technically should fit with your Reese hitch part #RP30047 but Curt does specify that it's supposed to only be used with Curt hitches. So…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...