Recommended Toilet Floor Flange And Gasket For 2018 Coachmen Leprechaun

Question

Question:

I have a 2018 Coachmen Leprechaun 319MB with a Thetford toilet. I need a replacement flange, flange seal and would like to buy the bolts just in case something breaks while repairing it. What part numbers do I purchase please?

asked by: Keith H

0

Expert Reply:

Since RV toilet flanges are universal, you can use either the Female Thread Replacement RV Toilet Floor Flange - 3" FPT # T05-0784 or the Male Thread Replacement RV Toilet Floor Flange - 3" MPT # T05-0782 to match your current flange.

You will also need the Valterra RV Toilet Floor Gasket with Hold Down Bolts # Q23653VP as it is designed to work with these two flanges. This will include the replacement bolts so you will not need to purchase them separately.

expert reply by: Samuel C

0

Answer 1

From what I could find on the Thetford toilets, they will use the same flange bolt pattern and footprint as Dometic toilets. So, you should be able to swap it out with the Dometic 320 Full-Timer RV Toilet #DOM87FR without issue. As far as replacing…

view full answer...

Answer 2

Yes, since you have a model 300 currently the Dometic Weekender Model 300 part #DOM74FR is the correct replacement. The gasket kit part #Q23653VP is correct as well for installing it.

view full answer...

Answer 3

The etrailer sticker seen on any product photos, like here on the Dometic 300 Weekender RV Toilet - Standard Height - Round Bowl - Tan Polypropylene #DOM74FR, is easily removable and is only used on the single product that was used for the photos so…

view full answer...

Answer 4

You will need to find a way to twist the flange off as it will be threaded. We have the MPT (Male Pipe Thread) part #T05-0782 and FPT (Female Pipe Thread) #T05-0784 flanges which both are for 3" sewage pipes like what you have on your 1998…

view full answer...

Answer 5

Replacing the floor flange of a toilet can be somewhat challenging and there aren't really any great shortcuts for it. Step 1 Flush out your black water tank. While this is not a necessary step for replacing the toilet flange, it makes the job…

view full answer...

Answer 6

You will have to cut the flange off if it is glued on and not releasing. Some have luck with a prybar to get it to come loose. Just be careful not to damage anything.

view full answer...

Answer 7

That depends on which style flange the black water tank in your 2004 Alumalite requires. The flange will either have a male thread like the Replacement RV Toilet Flange #T05-0782, or it will have a female thread such as the #T05-0784. The only way to…

view full answer...

Answer 8

According to Valterra, you should use a non-hardening sealant safe for ABS plastic. Don't use standard pipe dope or teflon tape as the pipe dope will harden over time which can cause leaking. Teflon tape acts as a lubricant, not a sealant. The…

view full answer...

Answer 9

For your 2008 Chevy Trailblazer you are going to need to use a universal style towing mirror like the K Source Universal Towing part #11953 (sold individually) or the Clip-On Mirror we offer from K-Source, part #KS3891 that I like better, as I…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...