Do you Offer A Replacement Remote for the MaxxAir MaxxFan Intake and Exhaust Vent Fans

Question

Question:

Do you have the wall switch kit for this fan? O4500k

asked by: Wayne

0

Expert Reply:

The MaxxFan Plus Roof Vent w/ 12V Fan part # MA00-04500K does not have a wall switch option but a remote option that gets mounted to the wall to eliminate the need to run wires through the walls.

For the replacement use the Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans part # MA00A01150K. While it does look different than the original it is the current replacement being offered.

expert reply by: Randy B

0

Answer 1

I have a solution for you, but I'm not aware of any RV fan/vent that actually has a wired wall control since these fans don't actually control any temperatures. However. the MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered…

view full answer...

Answer 2

The thermostat of the MaxxFan Plus Roof Vent w/ 12V Fan #MA00-04500K that you referenced is integrated into the fan assembly base. You would not need to have a thermostat on your vehicle for this to wire into.

view full answer...

Answer 3

To connect the Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent #MA59FR you will need - if you don't have it - the Replacement Control Cable for MaxxAir MaxxFan Plus Roof Vent Wall Control Panel #MA69FR. You'll need to route that cable…

view full answer...

Answer 4

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 5

When wiring a trailer connector, it is best to wire by function, as wire colors can vary. We have an excellent wiring diagram on our website, I will provide you a link so you can look at it. If you are looking at the inside of the trailer connector…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 11

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...