2007 Montana 5th Wheel Ladder Replacement

Question

Question:

I have a 2007 Montana 5th wheel where is ladder is damaged. I would like to replace it, but dont k ow which Stromberg ladder would be best. Please advise. Thanks,

asked by: Gail L

1

Helpful Expert Reply:

For your 2007 Montana 5th wheel the Stromberg RV ladder you'd want is the part # LA-401BA which is 99-1/2 inches tall, can be trimmed shorter if needed, and also has a hinge in the middle of it for more flexibility as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The Winntec 6020 is an automatic changeover regulator, and the best option we have to replace it is with one from Camco, which is the following part number: - Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks #CAM59005 This…

view full answer...

Answer 2

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...

Answer 3

I may be able to help you find a suitable replacement ladder for your 2005 Keystone Montana 328RLS 5th wheel camper. We have the Surco Universal Exterior RV Ladder #SP501L that has a length of 97" and the Stromberg Carlson RV Exterior Ladder…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 9

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 12

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

2007 Montana 5th Wheel Ladder Replacement

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching