Will the CIPA Blind Spot Mirror Fit on a 2016 Mercedes Benz Sprinter 2500

Question

Question:

Will this fit on the 2016 Mercedes Sprinter 2500 mirror.

asked by: Cheney

0

Expert Reply:

The CIPA Top Mounted Blind Spot Mirror - Convex - Clamp On - 4" Oval - Qty 1 # CM49805 is designed to be a universal fit on a variety of different vehicles. I've linked our review video of this part that shows how it clamps on but after looking at some photos of the mirrors on a 2016 MB Sprinter 2500, I'm confident this will work just fine.

expert reply by: Erik B

0

Answer 1

In order to carry bikes on the back of your motor home while also towing your 2019 Honda Fit you will first need a dual hitch adapter which I have attached a list of options for your below. Roadmaster Dual Hitch Receiver Adapter (4" Rise/Drop) -…

view full answer...

Answer 2

If you are looking for a protective screen or guard for a vehicle being flat towed behind a motorhome we do have such products. Both types of products are displays on the two linked pages. These include products like the Roadmaster Guardian #RM-4000…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 5

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 6

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 7

You are correct that the Jeep bracket should have been reinstalled when installing the Blue Ox Base Plate #BX1139. I have linked another video near the bottom of the page where you can see the brackets being reinstalled on a 2020 Jeep Wrangler around…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

I can go ahead and give you the measurement between the bolt holes for the Curt Trailer Hitch Receiver #13358. As you can see by the accompanying diagram, this hitch measures 39-1/2 inches between the brackets from inside to inside, and you can use…

view full answer...

Answer 10

If your 2019 Mercedes-Benz Sprinter 2500 has a standard bumper without the step, the Draw-Tite #75549 is going to provide you with the most ground clearance at 15" from the bottom of the receiver tube to the ground. If your Sprinter has the…

view full answer...

Answer 11

The Curt hitch part #13358 that you referenced fits the long and short wheelbase versions of your 2016 Mercedes Benz Sprinter 2500 with the factory step bumper. To determine if your spare carrier will fit past the bumper when this hitch is installed…

view full answer...

Will the CIPA Blind Spot Mirror Fit on a 2016 Mercedes Benz Sprinter 2500

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching