Replacement Male and Female Quick Disconnects and Ferrule for Roadmaster BrakeMaster Braking System

Question

Question:

I had purchase the air over hydraulic tow kit. Works great. Can you sell me a male replacement connector with new Ferrule and a female connector. They got damage?

asked by: Russell S

0

Expert Reply:

We do have the replacement parts you need for your Roadmaster BrakeMaster System # RM-9160.

It sounds like you need both the male and female quick disconnect fittings, and to get both the correct part is the Roadmaster Quick Disconnect Kit for Brakemaster # RM-921004-80.

They are also available separately with the RoadMaster Female Quick Disconnect # RM-450710 and RoadMaster Male Quick Disconnect # RM-450720.

For the ferrule, the correct part is the Replacement Brass Ferrule # RM-450740.

If you were needing any other parts, or ones different from what I listed, please let me know.

expert reply by: Kyle S

0

Answer 1

I think what you are looking for is the RoadMaster BreakAway kit, part #RM-98160. This kit was originally designed to be used for a second vehicle so all you have to do is move the cylinder and brackets. Since you have the bracket and cylinder, and…

view full answer...

Answer 2

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The instructions for installing the air line on your Holiday Rambler Neptune from the Roadmaster BrakeMaster, like part #RM-9160, is fairly extensive but if you check out page 10 of the linked instructions for the BrakeMaster you can see that the…

view full answer...

Answer 5

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...

Answer 6

For your 2012 Jeep Liberty Sport 4WD, I recommend the Roadmaster EZ Base Plate Kit - Removable Arms #521433-1 to start your flat tow set-up. I've attached a video of this installation to help. For a tow bar, I recommend the Roadmaster Falcon 2…

view full answer...

Answer 7

Unless the coach manufacturer has that quick disconnect valve reserved for something else you can use it to install a Roadmaster BrakeMaster breaking system such as #RM-9160 for RVs with air or air over hydraulic brakes. Otherwise you would tap into…

view full answer...

Answer 8

Great question, Bob! The Demco Stay-IN-Play Duo Flat Tow Brake System #SM99251 actually activates the vacuum in your vehicle so the vehicle brakes work more naturally - it doesn't rely on the vehicle's vacuum system to operate. If your…

view full answer...

Answer 9

I attached a wiring diagram for how the Brake Lite Relay part #RM-88400 installs and in it you'll see that it does not need to be wired to a breakaway system of any braking kit. The second picture I attached shows how the breakaway kit of the…

view full answer...

Replacement Male and Female Quick Disconnects and Ferrule for Roadmaster BrakeMaster Braking System

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching