Class V Trailer Hitch that Fits 2014 Chevy Express 3500 RV on Cutaway Chassis

Question

Question:

Im looking for a class V RV trailer hitch for my 2014 3500 1 ton van part number is Kirk c153 205v XD my question

asked by: James T

0

Expert Reply:

For your RV built on a 2014 Chevy Express 3500 cutaway chassis we have the Buyers Products part # 3371801102 as a fit which has a 12,000 lb towing capacity.

expert reply by: Jameson C

0

Answer 1

We offer universal fit hitches that fit many different vehicles. To add a class IV or V hitch to your 2013 Chevy express 4500 Cutaway from the hitches we carry, would require the hitch to be welded in place. I recommend the Curt Class V Universal…

view full answer...

Answer 2

The Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis #3371801102 measures 39 inches wide center to center. Then from edge of receiver tube to rear most hole 20-3/4 inches long. I've attached a photo with…

view full answer...

Answer 3

I did a little research and as long as the body that is on the cutaway version of your 2008 Chevy Express 3500 Van is no lower than the rear bumper would be on standard models you can use any of the same trailer hitches. One of the most popular…

view full answer...

Answer 4

The best trailer hitch receiver we have for your 2007 Chevrolet Express Van Cutaway is the Buyers Products 2" Hitch Receiver part #3371801102. This is the only option we have that is made specifically for the cutaway model. It has a 1,200 lb…

view full answer...

Answer 5

I recommend the Curt item #C15320 trailer hitch for your 2021 Chevrolet Express 4500. This is a 2 inch class V hitch with a 16000 lbs towing capacity, 2400 lbs tongue weight, and is the heaviest duty hitch for your van. You're going to need a…

view full answer...

Answer 6

The Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis #3371801102 you were looking at measure 39" from center to center of the mounting holes as you can see in the included diagram, so depending where you measured…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Class V Trailer Hitch that Fits 2014 Chevy Express 3500 RV on Cutaway Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching