Installation of the LaSalle Bristol Single Bowl RV Bathroom Sink

Question

Question:

What kind of sealant do I use to attach the drain pipe to the sink?

asked by: Dakota

0

Expert Reply:

When installing the LaSalle Bristol Single Bowl RV Bathroom Sink, # 34416156PPA the drain tube to the sink (as well as seal the sink to your counter top) you will want to use a good silicone sealant, something such as TremPro 644 # 0160297. This will create a water tight seal at the connection point for proper operation.

expert reply by: Michael R

0

Answer 1

The black tube in the attached picture is meant to be attached to the bottom of the LaSalle Bristol Single Bowl RV Bathroom Sink part #34416156PPA. At that point you can use the flex pipe in your RV to connect directly to the black pipe. The flex…

view full answer...

Answer 2

Your best bet would be to replace the sink with Item #34416156PPA . It comes with all new mounting hardware and brackets as we do not offer just the replacement brackets.

view full answer...

Answer 3

The LaSalle Bristol Single Bowl RV Bathroom Sink Item #34416270PWA does not include the drain tail pipe but, I have you covered. The LaSalle Bristol Pop Up Drain Item #34465WPR1303 is designed for this sink.

view full answer...

Answer 4

You'll need to place the LaSalle Bristol Single Bowl RV Bathroom Sink #34416305PWA on the counter and then use the mounting tabs to clamp the sink to the underside of the counter. You'll screw a tab to each mounting point on the sink and face…

view full answer...

Answer 5

According to my contact at LaSalle Bristol, there is no significant difference between the 17" x 20" Oval Lavatory Sink #34416305PWA and the 17" x 20" Oval Lavatory Sink #34416370PWA. It appears the brackets included with…

view full answer...

Answer 6

For the LaSalle Bristol Single Bowl RV Kitchen Sink, #34413M111 you have 2 installation options. Installing as a drop-in (or self-rimming) and undermount option. Because you are not replacing an existing sink, a hole 1/4" smaller than the…

view full answer...

Answer 7

The down tube for the LaSalle Bristol 14-3/4" x 12-1/4" Lavatory Sink #34416186PPA needs to be attached to the sink with an appropriate sealant or glue. It is not screwed into place. We do have smaller strainer baskets with the LaSalle…

view full answer...

Answer 8

The foam washer that comes with #34465SPR1303 sits underneath the stainless steel drain flange inside the sink. When you tighten the nut down on the other side it will compress the foam washer creating a seal. This should be enough to keep anything…

view full answer...

Answer 9

The mounting hardware that comes with the LaSalle Bristol Single Bowl RV Bathroom Sink #34416270PWA essentially acts as a clamping system. The screws will insert through the hole in the tabs and then into the threaded locations on the underside of…

view full answer...

Answer 10

You won't see too much information on how tight to make a bar style friction sway control unit because it will be different for every situation. You would make it about as tight as you think it needs to be and then tow the trailer to see if it…

view full answer...

Answer 11

You can use some silicone sealant like the TremPro 644 #0160297 on the outside of the LaSalle Bristol Single Bowl RV Bathroom Sink #34416156PPA drain hole and slide the drain tube on. You can also use this sealant around the outter lip of the sink to…

view full answer...

Answer 12

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Installation of the LaSalle Bristol Single Bowl RV Bathroom Sink

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching