Width of Rhino-Rack Fishing Rod Carrier # RR573F Where it Carries Fishing Poles

Question

Question:

what are the dimensions of the box, fish rods are often 7 single piece.

asked by: DAVE T

0

Expert Reply:

The internal length of the Rhino-Rack Fishing Rod Carrier # RR573F that you referenced has an internal length of 12-13/16 inches. That means there's 12-13/16 inches of width where it can carry the fishing poles.

expert reply by: Jameson C

0

Answer 1

The Rhino Rack Fishing Rod Carrier #RR573F can fit on 2 inch diameter crossbars if you use the Heavy-Duty Crossbar Adapter Kit #HD-FK1. This basically gives you longer bolts for the mounting brackets so they can fit the larger diameter bars.

view full answer...

Answer 2

Yes, the Rhino-Rack Fishing Rod Carrier #RR576F will absolutely fit the 2-3/4 inch wide & 36 inch long crossbars on your 2003 Ford Expedition without any issue. I have added a link to a video review of this carrier for you to check out as well. -…

view full answer...

Answer 3

In regards to the Rhino-Rack Fishing Rod Carrier part #RR576F, the 3-5/8" refers to the clearance for bindings like on snowbards which the carrier can also be used for. In other words, it will be the distance from the center of the carrier where…

view full answer...

Answer 4

You could certainly use a small step stool like the #SASA-10C-G to make it easier to reach the Rhino Rack #RR573F fishing rod holder. The step's 15-1/2 height would definitely help bring things within reach. The option I really like is the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

The Rhino-Rack's Locking Fishing Rod Carrier #RR574F is great product that will work wonderfully for your application, you can't go wrong purchasing this product. This has universal mounting hardware that fits all popular roof rack bar…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Width of Rhino-Rack Fishing Rod Carrier # RR573F Where it Carries Fishing Poles

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching