Roof Rack Recommendation for Truck Cap on 2016 Chevy Silverado 2500

Question

Question:

I need a cap rack that has 7 inch clearance

asked by: Gwendell F

0

Expert Reply:

For your application I recommend using the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-140B. This is under the 7" height clearance that you're looking to avoid and it is very customizable due to the tracks and higher 220 lb weight capacity when compared to other options. It is worth noting that you'll want to double check the weight rating for your truck cap and keep from exceeding the lower of the 2 ratings.

expert reply by: Jon G

0

Answer 1

Installing the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells #Y01-140B is pretty straightforward in that you will install the rails by using a 6.5mm drill bit to drill holes in your roof and then after that it's a simple manner of…

view full answer...

Answer 2

Thank you for the details! The Rhino-Rack Roof Rack for Factory Tracks #Y02-480B-NT are exactly what you're looking for to fit the ARE topper tracks on your 2020 Chevy Colorado. These fit directly to your tracks, are more cost-effective than…

view full answer...

Answer 3

We do have some great options for your 2002 Toyota Tundra with Leer truck Cap. But, we do not have any that fit what you are looking for and do not require rails to do so. The Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells #Y01-130B are…

view full answer...

Answer 4

The Rhino-Rack Ski and Snowboard Carrier, #RR576 is marketed for 6 pairs of skis or 4 boards and is 27-9/16" Long. The Rhino-Rack Fishing Rod Carrier, #RR576F has the same dimensions but uses the F identifier at the end to associate with…

view full answer...

Answer 5

The distance from the bottom of the crossbar of the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B to the track it mounts in measures 3 inches.

view full answer...

Answer 6

We can get your 2006 GMC Sierra extended cab set up with the matching 65 inch HD crossbar that come with the #Y01-140B system for your camper shell. To make it work the parts will need to be pieced out, but by adding each of them it will allow you to…

view full answer...

Answer 7

There a few options to add a rack to the Leer Canopy on the 2020 Chevy Silverado depending on if you have the tracks in your canopy already. I recommend Rhino Rack part #Y01-140B which comes with the tracks to install into your canopy. This will…

view full answer...

Answer 8

There are roof racks available that you will be able to install on your Leer camper. There are no special mounting brackets needed, but you will need to install tracks that the roof rack feet will sit in, and the crossbars will then attach to the…

view full answer...

Answer 9

I spoke with my contact at Rhino Rack and he informed me that the Rhino-Rack Roof Rack System w/ 2 Heavy-Duty Square Crossbars #Y01-140B that you referenced would add about 4-1/2 inches to the roof of the vehicle it would be installed on.

view full answer...

Answer 10

I'll start out by saying that the Rhino Rack roof mounted tracks like the ones included in the #Y02-480B come with caps that go on the ends of the tracks that can be removed and replaced if needed and allow you to cut the track to whatever length…

view full answer...

Answer 11

The Rhino-Rack Fishing Rod Carrier #RR576F offers multiple installation options. It can mount to a roof rack by clamping around the rack crossbars (round, square, aero, elliptical, and most factory crossbars) or it can be installed in the top channel…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Roof Rack Recommendation for Truck Cap on 2016 Chevy Silverado 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching