Is There a Roadmaster Comfort Ride Leaf Spring Suspension Kit for 3,500 Lb Axles

Question

Question:

Coachman 2019 Apex 293 RLD 3500lb tandem axles 31 center to center spacing on axles. Do they make a Roadmaster comfort ride leaf spring suspension kit for this unit. Thanks,

asked by: Earl G

0

Expert Reply:

The Roadmaster Comfort Ride Leaf Spring Suspension Kits are not offered for 3,500 lb axles. That said, you can add the Roadmaster Comfort Ride Shock Absorbers part # RM-2450 which will fit and work to improve the ride quality of the trailer.

expert reply by: Conner L

0

Answer 1

The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers part #RM-2450 is designed for 3,500 lb, 2-3/8" diameter axles. It will work with both underslung and overslung axles. That said, if you have any sort of spacer installed…

view full answer...

Answer 2

I was able to determine that your Lippert axles are 3,500 lb capacity axles so the Roadmaster Comfort Ride Shock kit you'd want would be the part #RM-2450.

view full answer...

Answer 3

To answer your first question, we have not changed the axle locations to the bottom of the axle set with the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers #RM-2450. As for the potential ground clearance issues, it is important to…

view full answer...

Answer 4

I do have an option for you but the Lippert Components Bolt-On Shock Kit like part #LC281281 is designed for use on overslung axles (leaf springs over axle) only. Therefore, it should not be used with the underslung (leaf springs under axle) axles…

view full answer...

Answer 5

In the past we have determined that the Lippert 2,700 lb axle has a 2-3/8 inch outer diameter which means the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers #RM-2450 that you referenced would fit and work great on your trailer.

view full answer...

Answer 6

Some trailers do have shock absorbers; it isn't all that common but is gaining popularity, mostly among camping trailers. The main reason it's not too common is most people aren't worried about the ride being that smooth. Usually the…

view full answer...

Answer 7

The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers part #RM-2450 will work on trailers with underslung (axle above leaf spring) and overslung (axle under leaf springs) axles. There are instructions in the manual for both options so…

view full answer...

Answer 8

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 11

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Is There a Roadmaster Comfort Ride Leaf Spring Suspension Kit for 3,500 Lb Axles

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching