Replacement 7-Way Connector for my 2016 Chevrolet Silverado 1500

Question

Question:

I am looking for a replacement trailer plug. I bought a bargman and it doesnt fit real well in my 2016 chevy silverado. Is there another brand that may fit a bit more snug? The current one I have been having contact issues with the brake lights, the brakes, and the turn signals. Just need something a bit more snug

asked by: Jason

0

Expert Reply:

I really like the Hopkins 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket part # HM40975. This will fit directly into the existing factory connector hole and not only gives you a 7-way but also a 4-way connector to use.

Check out the linked video.

expert reply by: Randy B

0

Answer 1

The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. If you check out the picture I attached you can see where you'll find the connector pointed out with a…

view full answer...

Answer 2

On a GMC Acadia, there is a trim panel below the dash and above the brake pedal. You will start be removing this panel carefully. There is a light attached to it so pull it down slowly so you do not break the light. With the panel out of the way,…

view full answer...

Answer 3

I have attached a photo for you below which shows how both a vehicle side and trailer side trailer connector is typically wired. I say typically because this is not always exact and so long as the trailer and vehicle side both match it will not…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver #C14012 you looked at fits the cargo van and passenger wagon models of the 2020 Ford Transit T350. The extended high roof won't impact fitment so you will be able to use this hitch on your T350. This is a Class IV…

view full answer...

Answer 7

First you will need to add the Curt Trailer Hitch Receiver #C78VV to your 2024 GMC Canyon. Do note this will replace a factory crossmember that is used since your Canyon did not come with the factory tow package. Next the Hopkins Multi-Tow 7-Way…

view full answer...

Answer 8

The part #HM40975 is designed to fit the round 7-way connector that is found on several vehicles. To install it would require your vehicle to have this round connector. (see picture) If instead you needed a way to hardwire in a 7-way to a vehicle you…

view full answer...

Answer 9

Great question Larry, so the current version of the Progressive Dynamics converter #PD4655V does support lithium batteries as-is. At one point it did not but since lithium batteries have become more popular Progressive Dynamics decided to make this…

view full answer...

Answer 10

To replace a 4-Way/7-Way connector on your 2021 Ram ProMaster 1500 you need the Hopkins Socket Kit #HM40975. Otherwise, if you're needing to ADD 4-Way and 7-Way sockets then you need the following parts: - Curt T-Connector Vehicle Wiring Harness…

view full answer...

Replacement 7-Way Connector for my 2016 Chevrolet Silverado 1500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching