Bearing Buddy that Fits Hub Bore Around 1.75 inch
Question:
I measured the dust cap and it is 1.5 inches the outer measurement of the hub is 1.75 I ordered a 1.98 and it is too big what size bearing buddy do I need. Boat trailer is loadrite model 181500780W 1790 4:80-12C tires
asked by: Trish P
0
Expert Reply:
If the hub bore is 1.5 inches like you mentioned (the area of the hub where the cap installs) then we don't have a Bearing Buddy that will fit. If the measurement was more like 1.75 inch then the # BB1781 would most likely fit as it measures 1.78 inches.
expert reply by:
Jameson C
0
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1781 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.781 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2047 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.047 Inch
- Bearing Buddy
more information >
Continue Researching
- Shop: Advent Air Low Profile RV Air Conditioner for Dometic Setup - Start Capacitor - 13,500 Btu - White
- Shop: Bearing Buddy Bearing Protectors - Model 1781 - Chrome Plated (Pair)
- Shop: Curt Wiring Adapter for Cequent Trailer Brake Controller Wiring Harnesses - Dual Plug In
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Replacement Trailer Hub Bearing - L68149
- Search Results: nylon bushing
- Search Results: l68149
- Search Results: 58846
- Search Results: l44649
- Search Results: gs 1719
- Search Results: trbu11566
- Shop: Brake Controller
- Shop: Trailer Wiring
- Search Results: trailer brake controller
- Video: Bearing Buddy Trailer Bearings Races Seals Caps - Caps - BB1781 Review
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review
- Video: Review of Dutton-Lainson Boat Trailer Parts - Boat Trailer Roller Bunk Bracket - DL21762
- Video: CE Smith Boat Trailer Roller Bunks Water Test
- Video: Dutton-Lainson Roller Bunks for Boat Trailers Review
- Video: Review of Redline Boat Trailer Parts - Roller and Bunk Parts - 7163184UB
- Video: Dutton-Lainson Boat Trailer Roller Bunk Bracket Installation
- Q&A: Can Trailer Dust Caps, Grease Caps, and Bearing Protectors Fall Off By Themselves
- Q&A: How to Measure a Trailer Hub or Dust Cap to Find the Right Replacement Dust Cap
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector