How to Remove the Trim Kit on Greystone 26” Flat Electric Fireplace # 324-000068

Question

Question:

How do you remove the frame so you can installing

asked by: Sandra C

0

Expert Reply:

The trim kit on the Greystone 26" Electric Fireplace # 324-000068 can be removed. Just lift up on the front of the trim kit and it should be free to pull away from the body of the fireplace. Be careful when removing the trim kit as it is made of glass. Then you can access the mounting brackets and use screws in the mounting holes for a more permanent installation.

Check out the video linked below for more details on this product. Removal of the trim kit can be seen starting at around 3:25 in the video.

expert reply by: John R

0

Answer 1

The closest fireplace that we offer to replace your older Greystone F26111E fireplace is the: -Greystone 26" Electric Fireplace with Crystals #324-000068. This fireplace measures 28-3/8" wide x 21-3/8" tall x 5…

view full answer...

Answer 2

Since your Greystone RV Fireplace #324-000068 is hardwired I recommend checking the power wire at the unit with a multimeter #PT29ZR and making sure you're getting a full 12v. If you are then you can move on to checking the ground to make…

view full answer...

Answer 3

Sometimes the RV fireplace circuit boards develop bugs that a simple reset fixes. You can do that by unplugging and plugging back in. Otherwise, if that does not work the unit would need to be replaced as the boards are not repairable or…

view full answer...

Answer 4

Usually when your Greystone Electric Fireplace #324-000068 is making noises like this, it's trying to tell you there's some sort of malfunction; I would first recommend unplugging the unit and letting it sit unplugged for 15 minutes…

view full answer...

Answer 5

The fan and temperature on the Greystone Electric Fireplace #324-000076 are adjustable to allow for maximum customization of how much air and heat is output by the unit.

view full answer...

Answer 6

The 26" Greystone SF208-26A has been discontinued by the manufacturer. My recommendation is the Greystone 26" Electric Fireplace with Crystals, #324-000068. This requires a wall cutout of 26-1/4" wide x 20-1/2"…

view full answer...

Answer 7

I contacted the distributor for the Greystone Curved Electric Fireplace #324-000068 to obtain the dimensions of the rear of this unit so you will know the size opening required to install it in your new travel trailer. My contact advised that this…

view full answer...

Answer 8

While the Greystone 26" Electric Fireplace with Crystals - Recessed Mount #324-000068 that you mentioned is not the exact same as the Greystone F2625A, it is going to be the correct modern replacement fireplace for your F2625A. Just like…

view full answer...

Answer 9

Since the heater you have now is a 26-inch-wide fireplace with a curved front our best replacement option is the Greystone part #324-000068 as this is the correct size but is not curved.

view full answer...

Answer 10

Yes it will. Just like the Greystone F2625, the Greystone fireplace #324-000068 a 26" electric fireplace, that measures 28-3/8" wide x 21-3/8" tall x 5 1-2" deep, and requires a cutout that is 26-1/4" wide…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

How to Remove the Trim Kit on Greystone 26” Flat Electric Fireplace # 324-000068

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching