Older Reese Dual Cam System U-Bolt Replacement for Brackets
Question:
Good day! I just bought an older dual cam system with draw tite 1000 spring bars and reese 26130 cam arms. What I dont have are the u-bolts to attach the cam arms to the bottom of the tongue frame or the binding brackets for the chains to hook up to. Will I have to have the u bolts made? Its going on a 2003 Innsbruck Gulfstream. And from what I can tell there are a bunch of binding brackets that could work. Would you recommend any specific ones? Thank you.
asked by: Scott S
Expert Reply:
The u-bolts for your system are no longer made. I don't have the dimensions of the brackets because they are so old and there have been a couple updates since the system you have. You can look at the attached U-bolt options to see if there is a fit for your current brackets based on length, width, and diameter.
If you want the newer system, you can use the Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames # RP26002 which will work well with your current system.
Product Page this Question was Asked From
Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW
- Shop: Reese Replacement Weight Distribution Chain Kit
- Shop: Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Shop: LubriMatic Heavy-Duty Midget Grease Gun Kit with Multipurpose Grease
- Shop: Rapid Hitch Ball Combo with 1-7/8" and 2" Hitch Balls - Greaseless Alumiball
- Search Results: grease
- Search Results: rp6637
- Search Results: 58392
- Video: Reese Dual Cam High-Performance Sway Control Review and Installation
- Q&A: Front of Truck Sways Once Reese Strait-Line Weight Distribution System is Installed
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Search Results: 25580
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: 68149
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Trailer Wiring Diagrams
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Shop: Fifth Wheel Hitch
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Shop: Suspension Enhancement