Pioneer Platform Compatible with Adarac Ladder Rack System on 2014 Ford F-150 5.5 Foot Bed

Question

Question:

I have an Adarac system on my Ford F-150 5.5 foot bed, and am wondering which Rhino Rack Pioneer Platform best fits, and will the universal mounting kit fit the square crossbars?

asked by: Mike O

0

Expert Reply:

The Rhino-Rack Universal Pioneer Platform Rack for Crossbars - 58" Long x 47" Wide # RR42115BF is an option for a direct fit.

expert reply by: Jason S

0

Answer 1

The Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B could install on the roof of your 2020 Ford F-150 but you should note this will require permanent modification to the roof of your vehicle. I'd much rather recommend the Rhino Rack…

view full answer...

Answer 2

The crossbars of the #RR29XR are 3-1/8 inch wide so basically any u-bolt wider than that would fit and work great. If you can let me know the basket you have I can see if we have replacement hardware for it.

view full answer...

Answer 3

In order to mount the Rhino-Rack Pioneer Platform Roof Tray part #RR35TB to Rhino-Rack Heavy-Duty Roof Rack Crossbars you need the Pioneer Platform Mounting Kit for Rhino-Rack Heavy-Duty Crossbars part #RR43105. This adapter attaches to the channels…

view full answer...

Answer 4

Rhino Rack does have a Backbone mount system that comes with some of their Pioneer Platform cargo trays but none that fit direclty to your 2018 Ford F-150. You'd have to use a universal mount style of Pioneer like the part #RR42115BF that you…

view full answer...

Answer 5

We do have a flush-mounted Rhino-Rack roof rack fit for your 2018 Ford F-150 SuperCrew, but you are right that 36 inches are not long enough. Instead, you will need the rack that has bars which are close to 50 inches, and I confirmed for you that the…

view full answer...

Answer 6

The best low profile roof rack we offer for a 2018 Ford F150 SuperCab is the Rhino-Rack ROC25 Roof Rack part #RR29XR. This roof rack as you can see the feet sit inside the mounting feet as opposed to being on top. That said, they don't get much…

view full answer...

Answer 7

To pair with the Rhino-Rack Backbone Mounting System for Pioneer Platform - Ford Ranger #RRRFRB1 you'll need the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 49" Wide #RR35TB. This is the correct Pioneer Platform that…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

Yes, the Replacement Cover #PE48UV will indeed fit the 2018 Ford F-150 extended cab with the 67" bed. This is made to be a replacement cover for the Pace Edwards JackRabbit Retractable Hard Tonneau Cover #311-JRFA05A28 which is specifically for…

view full answer...