Are Mounting Bolts Included with the Titan 10" Hydraulic Brake Kit

Question

Question:

Titan Hydraulic Brake Kit - Free Backing - Galphorite - 10inch - Left/Right Hand - 3,750 lbs - T4423500-400

asked by: MILES T

0

Expert Reply:

The Titan 10" Hydraulic Brake Kit - Free Backing part # T4423500-400 does not come with the installation hardware but we do have exactly what you will need with the Mounting Bolts and Hardware for 10" Single Brake Assembly part # BRKH10AS.

You will require one hardware kit per assembly you are installing.

expert reply by: Randy B

0

Answer 1

It's definitely way less work to keep what you have, surge brakes, than it is to convert everything to electric. Personally I'd just stick with surge brakes, as the only benefit you really get to electric brakes is the adjustability…

view full answer...

Answer 2

If you cannot find a sticker or plate on your boat trailer axle you can still get in the ballpark on its weight rating based on the brake dimensions. All of our 10 x 2-1/4-inch drum brakes, both electric and hydraulic, that work with 14-inch…

view full answer...

Answer 3

We have a few product options to replace your brake assemblies. I recommend the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs #AKFBBRK-35-D. This will give you both assemblies for one axle.…

view full answer...

Answer 4

Thanks for the information. There are three bearing kits that are all very similar. For your application you will want the Bearing Kit for #84 Spindle #BK2-100. I've attached a review and installation video for you to assist.

view full answer...

Answer 5

The Galvanized Demco Hydraulic Brake Kit #40716-15 is definitely the best coating that you can get for corrosion resistance. The other coatings are basically just different levels of powder coats while galvanized resists salt water much better. I do…

view full answer...

Answer 6

The big differences is basically pricing and brands. The part #AKFBBRK-35-D is a pair of Dacromet coated drum, hydraulic brakes that are free-backing. The part #40716-15 is essentially the same thing buy made by Demco. The etrailer brand is going to…

view full answer...

Answer 7

What it sounds like is happening with the Dexter Hydraulic Brake Kit - Free Backing - Galphorite - 10" - Left/Right Hand - 3,750 lbs #T4423500-400 locking up when wet is the shoe has likely absorbed moisture and expanded, causing the lock up.…

view full answer...

Answer 8

Knowing the inside diameter of the drum is the key piece of information we need; the brand of the assembly will not be a factor in determining what you will need to replace your hydraulic brakes. You mentioned your trailer's GVW, but it is the…

view full answer...

Answer 9

Dexter doesn't put reverse lock outs on their drum brake actuators so you'd need to add the part #DM5404 do a new actuator. The part #DX97FR is just the inner section of an actuator though. For the actuator you'd need the part #DX33FR.

view full answer...

Answer 10

The Replacement Inner Member for Dexter DX7.5L Brake Actuator part #DX97FR is compatible with a UFP A-70 Surge Brake Actuator.

view full answer...

Answer 11

The outer shell for the Dexter DX7.5L A-60 Brake Actuator #DX33FR is only available with the entire actuator. They do offer the Replacement Inner Member #DX97FR for this particular actuator since those parts are more likely to wear and become damaged…

view full answer...

Answer 12

The Dexter K23-027 is a 10 x 2-1/4 inch brake assembly typically found on a 3500 lb axle. The etrailer brand #AKEBRK-35-SA self-adjusting brake assemblies you referenced would be a perfect replacement. After an initial adjustment, the brakes will…

view full answer...

Are Mounting Bolts Included with the Titan 10" Hydraulic Brake Kit

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching