Will the Fastway e2 600 Lb Spring Bars Work With Fastway e2 450 lb System  

From the carpeted "floor" to the top of the railing on the 90" x 26" MORryde RV Cargo Sliding Tray #MR87FR measures 3-1/2" (see attached). If you jump to the 3 minute mark of the linked review video you can see where we take…

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

It does appear you are going to be able to flip the axles on your 2023 Northern Spirit 2145RBX using 2 of the Dexter Trailer Springs Over-Under Conversion Kits #K71-384-00. I will warn you Kalvin this will raise the height of your camper roughly…

The Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-0699 could potentially work however without knowing what system you currently have I won't be able to say for certain. The easiest way to find out what you need is to…

Yes, your 2013 Jayco Swift 264BH travel trailer should have had the Fastway e2 rated for 8,000lbs #FA92-00-0800 since the dry tongue weight is already 500lbs. The 6,000lb #FA92-00-0600 would have been quickly overloaded since it is only for trailer…

The Curt TruTrack Weight Distribution System part #C17500 which is rated for up to 10,000 lbs gross trailer weight and 1,000 lbs tongue weight would work but it wouldn't perform as well as the Curt TruTrack Weight Distribution System part #C17499…

The biggest issue with a weight distribution hitch like the Fastway e2 #FA92-00-1200, which is likely what you've got on your trailer, is that the hitch head doesn't provide any friction or tension. Having a weight distribution hitch that…

The Reese weight distribution system part #RE94FR is the best value for your Rockwood Geo 19FD and would be what I would go with if I were you. It's just as effective as the Fastway e2 part #FA94-00-0600 but at a much better price.

The correct Fastway e2 Weight Distribution w/ 2-Point Sway Control for a Lance 1475 Trailer is part #FA94-00-0600 for round or part #FA92-00-0600 for trunnion. The trunnion spring bars are needed for vehicles which sit lower to the ground. The…

As a first step, you'll want to determine the tongue weight of the camper when it's fully loaded as you'd normally tow it. To that figure, add the weight of anything carried in the truck bed that's behind the rear axle. These combined…