Furrion Vision S 4.3 Inch Monitor Will Not Turn On

Question:

I used the Furrion on 2 trips after initial purchase, when I went to use it on the last one the monitor would not power up, my lights were on the cigarette lighter works the trailer was hooked up with power but monitor plugged in but would not power up no light or picture, checked the connections several times and plugged it into different cigarette lighter ports same result...thanks

asked by: Craig M

Expert Reply:

If the 4.3" monitor is not turning on from your Furrion Vision S Wireless RV Backup Camera System # FOS43TASF, there are a couple of things to look for, according to the manufacturer. Furrion says that this issue is likely one of two different things. The first being the power cable is not fully connected or has maybe come loose, so to check that. The other thing that may be happening and is more likely is that the fuse in the 12 volt socket has blown and needs replacing.

Should neither of those things be the issue then you will need a replacement monitor, the Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR.

expert reply by: Kyle S