Replacement Spring Bars for 10,000 lb Curt TruTrack Weight Distribution Hitch

Question

Question:

Replacement spring bars for Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW # C17500

asked by: David W

0

Expert Reply:

We do have the replacement spring bars you need for the 10,000 lb towing/1,000 lb tongue weight Curt TruTrack Weight Distribution Hitch # C17500.

The correct part is the Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System # C17536.

expert reply by: Kyle S

0

Answer 1

With your trailer having a 7,000 pound rating, the Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 #C17500 may not be the best option for you. Typically the tongue weight of a trailer will be 10% of its…

view full answer...

Answer 2

With weight distribution systems like the Curt TruTrack part #C17500 you can back up as long as you are going mainly straight. If you are going to jackknife the trailer you would need to disconnect the bars.

view full answer...

Answer 3

You can back up with the Curt Weight Distribution system part #C17500 that you referenced as long as you are backing mainly in a straight line. Some systems are more strict on this than others, but basically you don't want to end up in a jack…

view full answer...

Answer 4

You won't be able to jackknife your trailer but aside from that the Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW item #C17501 doesn't restrict your ability to back up or your turning…

view full answer...

Answer 5

Hey Dennis, we have a replacement 7-way plug with the part #A7WCB which would work great to replace your damaged one. I attached a diagram for 7-ways for you to check out as well.

view full answer...

Answer 6

It does appear you are going to be able to flip the axles on your 2023 Northern Spirit 2145RBX using 2 of the Dexter Trailer Springs Over-Under Conversion Kits #K71-384-00. I will warn you Kalvin this will raise the height of your camper roughly…

view full answer...

Answer 7

Yes, you are able to switch to the 2" Ball #A-90 on the Curt TruTrack 2P Trailer Mounted Weight Distribution System #C67ZV. As Curt does not offer the hitch with a 2" ball you will have to change it out yourself or have it done at the shop…

view full answer...

Answer 8

I recommend using the Rear View Safety Universal Mirror Monitor #RVS-619N with the Rear View Safety Backup Camera System #RVS-770613-213. This is their larger 7" monitor which will give you a clear view with a color screen.

view full answer...

Answer 9

The Electric Jack w/ Footplate and 7-Way Plug #EJ-3527-BBX uses a 7-way RV-style plug. I have included a diagram that shows the pin-out for RV style 7-way plugs. This will show you what each pin does. I have also listed the functions below and linked…

view full answer...

Answer 10

For a trailer that has an angle iron frame like what you have what I would recommend is a system like the Reese Steadi-Flex part #RP66558 you referenced and have the outer brackets welded to the frame of the trailer since there isn't a clamp on…

view full answer...

Answer 11

With the Timbrens there isn't a difference in fitment between standard model Tundra's and the TRD Pro so you'll be able to use one of the following options for your rear suspension: 4,800lb capacity #T83MR 6,000lb capacity #T45MR 7,000lb…

view full answer...

Answer 12

For a weight distribution system, there are always exceptions,but in general the systems with only bars and chains do not have sway control. They are adjustable in tension for different weight, but are a little more work. The bar systems whether…

view full answer...

Replacement Spring Bars for 10,000 lb Curt TruTrack Weight Distribution Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching