Picking Out Replacement Hub Seal for Trailer Hub with 6 Lug Bolt Pattern

Question

Question:

I need an outer seal for na yacht club boat trailer. It is a 2013 it has 225/75 r15 tires. 8 p.r. weight 1150 rating 6 lug. Thats about all the info that I have right now.

asked by: Richard S

0

Expert Reply:

Since it's a 6 lug bolt pattern you most likely need the seal part # GS-2125DL but you'll need to verify this by pulling off a hub and measuring the diameter of the spindle where the seal rides. If it's 2.125 this is the seal or if it's 2.25 you'd need # GS-2250DL. If for some reason it's not one of those two diameters let me know and I'll see what we have that would fit. I'll also need the bore diameter on the hub where the seal installs as well in this case.

expert reply by: Jameson C

0

Answer 1

You can verify that the 10-19 grease seal included in Bearing Kit #BK2-100 is the correct one for your spindles by taking two measurements. First you want to measure the rear hub bore where the seal is inserted. The seal's outer diameter needs to…

view full answer...

Answer 2

The EZ Lube spindle style with the grease zerk is designed for maintaining your bearings and not for the initial grease of your bearings. The best way to pack your bearings with grease is to us the Powerbuilt Deluxe Bearing Packer #ALL647646. You…

view full answer...

Answer 3

To pick out a replacement grease seal you will need to measure the diameter of the spindle where the grease seal rides with a digital or dial caliper and then need to measure the hub bore where the current seal rides. With those two dimensions we can…

view full answer...

Answer 4

Unless you can get the bearing numbers and seal information from the manufacturer, there isn't a way to really find that information without removing the hubs. You don't have to dismantle them if you want to measure the spindle in a couple…

view full answer...

Answer 5

The #168233 Double Lip Grease Seal has an outside diameter of 2.332 inches and an inside diameter of 1.688 inches. This seal is not compatible with a AF2527E seal with a O.D 2.312, because, even though the O.D. id very close, the inner diameter of…

view full answer...

Answer 6

I linked our main page for trailer grease seals which has filters that allow you to select parts based on dimensions and other features, such as single-lip or double-lip types. We do not offer any seals with your exact inner and outer dimensions. If…

view full answer...

Answer 7

The bearing kit you need for your Lippert 7,000 lb axles is Bearing Kit #BK3-210. This kit contains the correct bearings, #25580 and #14125A as well as the matching races and grease seal #GS-2125DL.

view full answer...

Answer 8

That is correct. The #GS-2250DL is the direct replacement for your old grease seal marked P02860 on your 2019 Keystone Cougar.

view full answer...

Answer 9

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

view full answer...

Answer 10

The 84545 hub on your Stratos Trail Trailer uses the standard bearing combination for a 3,500 lb axle just like the #84545UC1-EZ and #84545BX. This means the correct bearing kit is the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb…

view full answer...

Answer 11

When using an EZ-Lube hub, such as hub/drum assembly #AKHD-545-2-EZ-2K, on an EZ-Lube spindle it is not necessary to also use Bearing Buddy bearing protectors. An EZ-Lube spindle, such as part #TRU44FR, has a grease zerk fitting to allow you to pump…

view full answer...

Answer 12

A 14 oz container like the part #L11390 would be more than enough to grease your hubs. For a grease gun you would want part #L30200. Here's how to grease everything upon initial installation. First, grease your bearings and spindle by hand or…

view full answer...