Trailer Hitch Receiver for 2013 Lexus RX 450h

Question

Question:

I have a 2013 Lexus RX450h. It has a 3.5 liter V6 w/VVT front electric drive motors with Lexus hybrid drive. Can I still get this trailer hitch? How difficult is it to install this hitch and will it fit perfectly in my vehicle.

asked by: Richard B

1

Helpful Expert Reply:

I double-checked with the manufacturer for you and can confirm your 2013 Lexus RX 450h is completely compatible with the Curt Trailer Hitch Receiver # C13143.

The hitch - which will fit your Lexus perfectly - is not a difficult install as it's a bolt-on installation.

expert reply by: Kyle S

1

Answer 1

The Curt #C13382 and etrailer #e98912 hitches for your 2022 Subaru Crosstrek have the same construction, capacities, and design, but the big difference is that the Curt hitch has the classic glossy finish while the etrailer hitch has a matte black…

view full answer...

Answer 2

The connector should be located underneath the dash to the left of the steering column. It may be taped to another wire and tucked up and out of the way. I have linked a video installation of brake controller being installed on a 2007 Toyota Tundra…

view full answer...

Answer 3

To keep the bikes from making contact with each other as well as the back of the vehicle I recommend only looking at platform style bike racks such as #MPG2149 and the Swagman XC #S64650. With the hanging style racks you referenced the bikes will…

view full answer...

Answer 4

Thank you for the kind words! The 2" trailer hitch receiver I recommend for your 2022 Chrysler Pacifica Hybrid is the Curt #C13383 because it has a thicker powder coat than most other hitches so it holds up better to the elements. Curt has a few…

view full answer...

Answer 5

We have two really great and easy to install trailer wiring harnesses that fit your 2019 Lexus RX 350. We have the Tekonsha kit part #118255 for if you do not have the factory tow package, or if you did have the tow package part #118252 which is just…

view full answer...

Answer 6

The correct hitch for your 2016 Subaru Impreza Wagon from EcoHitch is the part #306-X7211. Best option would be to return the hitch you have and go with this one.

view full answer...

Answer 7

For your 2016 Subaru Impreza we only have one 2 inch trailer hitch and that is the EcoHitch part #306-X7211 that you referenced.

view full answer...

Answer 8

Once the hitch is in position over the bolts hanging down from the frame you will need 2 of the flat washers per bolt instead of just 1. That is what is indicated in the instructions for the hitch: "Step 8. With all hardware properly fished into…

view full answer...