Replacement Anchor Straps with Rubber Coated Hooks for Saris Trunk-Mounted Bike Racks

Question

Question:

Hi, the rubber of the hooks of my Saris bike rack is coming off so I would like to replace all straps to avoid rusting my car Crosstrek 2019. I assume I need to place three different orders upper, side, and lower attachment straps. Please let me know if I am wrong. If not, can you please help with that? e.g., part numbers, etc.. Thank you very much in advance. I contacted Saris, to no avail. All the best

asked by: Giordana

0

Expert Reply:

The Saris Bones EX 3 Bike Rack - Trunk Mount - Adjustable Arms # SA803 and the Saris Bones 2 Bike Rack - Trunk Mount - Adjustable Arms # SA805BL are both confirmed to fit your 2019 Subaru Crosstrek. Both will utilize the Anchor Straps for Saris Bones, Bike Porter, and Sentinel Bike Racks - 80" Long - Qty 2 # SA2047 you referenced as replacement straps. They come with two straps that do have the rubber coated hooks so you will need to order 3 to replace all 6 straps/hooks.

expert reply by: Jason S

0

Answer 1

The Anchor Straps for Saris Bones, Bike Porter, and Sentinel Bike Racks part #SA2047 come with two straps, each with one hook and built-in cam. These are designed to replace the standard length straps that come with Saris trunk mounted bike racks in…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 6

Hey Antone, you are right the battery placement on the 2022 Honda CR-V is the reason the hitches do not fit so a trunk mounted bike rack solution would be your best bet. The one I recommend for your CR-V is the Saris Bones 2 part #SA805BL that you…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Replacement Anchor Straps with Rubber Coated Hooks for Saris Trunk-Mounted Bike Racks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching