Correct Replacement Motor and Gear Box for RV with Motor Number 366048/366043

Question

Question:

I need a gear box and motor for my 2018 fleetwood Bounder steps. The P/N on the actuator is 366048 and your web site keeps telling me the P/N is 366043. Whats the right part number for my coach. What it says on the part is 366048, Assy, Step Actuator Curved A, LCI P/N 366048. Please help me.

asked by: Ronald K

0

Expert Reply:

Based on what you the correct motor is the part # LC379147 and the correct gear box is the Replacement Gear Box and A Linkage for Kwikee Electric RV Steps # LC379160.

expert reply by: Jameson C

0

Answer 1

It sounds like you're trying to replace the motor on your Kwikee steps with the part number 366043, and we have just what you're looking for. In order to replace the motor for these steps you'll want to use the Replacement Motor for…

view full answer...

Answer 2

I spoke with my contact at Lippert regarding the 366043 model motor/gear box assembly for your Kwikee Steps. He stated that the correct replacement motor is the Lippert Kwikee Motor #LC379147 and for the gear box you will use #LC379160. These will be…

view full answer...

Answer 3

If your RV steps are making a noise and then they won't retract without some help then you definitely need to replace the motor. For your LCI 336043 the direct replacement is #LC379147. Should you continue to hear a clicking noise then we may…

view full answer...

Answer 4

As you have been hearing a grinding noise on the Kwikee steps on your 2019 Tiffan Open Road Allegro, I would check the Gear Box and A Linkage #LC379160. If you remove the gear box you will be able to actuate the arm and determine if you feel any…

view full answer...

Answer 5

The correct replacement motor for your LCI motor 366043 on your Kwikee steps is Lippert Components Kwikee Motor and Screws for New IMGL Step Item #LC379147.

view full answer...

Answer 6

The Lippert #LC379147 is indeed the replacement motor for the 366043 that you mentioned.

view full answer...

Answer 7

There is only one difference in the Kwikee 26 Series Electric RV Step part #LC3711363 and part #LC371136. The LC3711363 uses the 9510 control and the LC371136 uses the standard control. I am sorry but they are not offered non powered .

view full answer...

Answer 8

Since you need the Replacement Control Unit for Kwikee 38 Series Electric RV Steps #LC363989 I'm assuming you have 38 series steps on your 2017 Thor Windsport. The correct replacement motor for these steps would be the #LC379147.

view full answer...

Answer 9

Thank you for the pictures- they're always helpful! I have a solution for you, but the Lippert gear box you were looking at is a replacement for the newer Kwikee 32 Series Steps. I spoke with my contact at Lippert and they said that the gearbox…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...