Can DeeZee Custom Fit Truck Bed Mat for 2019 Nissan Frontier be Cut

Question

Question:

I have a 2019 Nisson Frontier 5 ft bed with in bed liner. Will I be able to cut mat to fit my truck

asked by: Janice B

1

Helpful Expert Reply:

The DeeZee Custom-Fit Truck Bed Mat # DZ86965 is a direct, custom fit for your 2019 Nissan Frontier, so you won't have to cut it as it will fit your 5 foot bed. However, the mat is able to be cut if you would like to for one reason or another.

I have added a link to a video review for you to check out of the DeeZee Custom-Fit Truck Bed Mat # DZ86965.

expert reply by: Kyle S

1

Answer 1

The DeeZee Custom-Fit Truck Bed Mat #DZ86985 will fit over most bed liners. It will provide some extra traction so your load doesn't slide, but it won't grip as well as intended when used with the bed liner. The raised ribs will give…

view full answer...

Answer 2

So you will need to access the 12 pin jumper plug in your Frontier's cab, which as you said is on the passenger’s side behind the kick panel. This is where you will install the harness and relays that activate the trailer tow package, and…

view full answer...

Answer 3

From what I could find, it looks like the plug for a trailer brake controller on your 2023 Nissan Frontier is located in the same location as the 2022 model year. That is behind the side panel by the OBD connector and is likely pushed back into the…

view full answer...

Answer 4

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

view full answer...

Answer 5

The DeeZee Universal Truck Tailgate Mat part #DZ86700 installs via screws which are attached by drilling into the tail gate as you can see in the attached photo. The DeeZee Universal Truck Tailgate Mat won't contour to the indents in the tail…

view full answer...

Answer 6

You will want to stay within the limits of the posted speed limit for sure but if you are using our tires they are rated for 65 miles per hour maximum unless otherwise stated on the tire itself. So, on the highway you can go as fast as you are…

view full answer...

Answer 7

Yes, the Kenda 215/60-8 Bias Trailer Tire with 8 inch Galvanized Wheel, #AM3H320, will replace a wheel and tire combination with tire size 18.5 x 8.5 - 8, as long as the bolt pattern of your original wheel is 5 on 4-1/2 inches and the weight capacity…

view full answer...

Answer 8

For your 2022 Nissan Frontier, I recommend Wiring Harness #C56225. As far as a hitch goes we do have a few options for your truck, however, I recommend one of best sellers, the etrailer Trailer Hitch Receiver #e98869. This is a custom made class III…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 12

The height of the SumoSprings Solo Custom Helper Springs #SSR-612-47 is 4-1/2". These are designed to have a 1/2" - 1" gap so if you have a lift you will need to measure to make sure they will fit. If the gap is more than 1" then…

view full answer...

Can DeeZee Custom Fit Truck Bed Mat for 2019 Nissan Frontier be Cut

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching