What are the Wire Gauges of the 7-Way Molded Connector w/ 10 Cable # 54006-059

Question

Question:

what gauge is the 10' moulded trailor plug

asked by: Bob B

1

Helpful Expert Reply:

The wires of the 7-way with Lead part # 54006-059 are:

Black/white: 10
Blue: 12
Yellow/green/red/brown: 14

expert reply by: Jameson C

1

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Answer 4

Hey Paul, For the stainless steel version of part #SM78VR you'll just need the SmartPlug RV TV/Internet Inlet - 2 Coaxial Connector - Stainless Steel #SM58FR. This comes with two coaxial connectors but you can always pop one out and install…

view full answer...

Answer 5

Hey Isaac! While we don't have one specific all in one kit we do have every component you will need to update your trailer's lighting and brakes. I recommend using the Trailer Wiring Kit item #ET7WK. This includes a 7-Way connector, a…

view full answer...

Answer 6

On each individual electric brake magnet the amperage draw would be 3.0 to 3.2 max amps at 12 to 13 volts on 7-inch brake magnets and 3.2 to 4.0 max amps at 12 to 13 volts on 10 and 12-inch brake magnets. The max amperage draw for the brake magnets…

view full answer...

Answer 7

The Dexter Hub #8-288-3UC1 has 5/8" wheel bolts. For 5/8 inch lug nuts torque them to 175 - 225 foot pounds.

view full answer...

Answer 8

The head of the B&W Companion OEM 5th-Wheel Hitch item #BWRVK3300 is 13" in diameter. You will want to use the Reese Lube Plate 12" Diameter item #RP83001. This 12 inch diameter plate works great on higher capacity hitches like your…

view full answer...

Answer 9

The hub face measurement on an axle would be the same if you have idler hubs or hubs/drums. The Dexter Trailer Axle part #35545I-EZ-89 for example which has idler hubs uses the same axle as the Dexter Trailer Axle part #35545E-ST-89 which has…

view full answer...

Answer 10

We have a large selection of A-Frame couplers like what would be on your older Winnebago travel trailer. You can certainly remove your weld-on coupler and replace it with a bolt-on unit, as long as the new coupler's capacity is correct for your…

view full answer...

Answer 11

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

view full answer...

What are the Wire Gauges of the 7-Way Molded Connector w/ 10 Cable # 54006-059

Product Page this Question was Asked From

Continue Researching