E-Bike Rack that Can Fit 1-1/4 inch Trailer Hitch

Question

Question:

Need a 1 1/4 in hitch rack for 2 electric bikes, total weight over 100 lbs. Didnt see any advertised. Can you help?

asked by: Joe B

0

Expert Reply:

For a Class I hitch there's only one option for carrying e-bikes with the Thule EasyFold XT part # TH903202. This is a really nice rack though that is easy to use and comes with a ramp setup that makes loading and unloading the bikes pretty easy.

I attached a review video for more info on this as well.

expert reply by: Jameson C

0

Answer 1

While the newer Camrys have special 2" hitches designed for them, the selection of hitches for your 2009 Toyota have only 1-1/4" hitches like the Curt Trailer Hitch Receiver #C12343. The good news is that these are Class II hitches which…

view full answer...

Answer 2

For your 2017 Toyota 4Runner TRDPro, I recommend using the Hollywood Racks Sport Rider SE Bike Rack #HLY84FR. This rack does require a 2 inch receiver and is able to carry bikes up to 80 lbs each, so it won't be a problem for your 2018 RadRover…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...