Is the Redarc V3 Tow-Pro Elite Trailer Brake Controller Available In the USA

Question

Question:

Redarc release a newer version in Australia last year. Will the EBRH-ACCV3 be for sale here soon?

asked by: Kevin

1

Helpful Expert Reply:

The Redarc Tow-Pro Elite Trailer Brake Controller V2 (part # RED44FR) is for the US market and the V3 is for the Australia market. There are only very minor differences between the V2 and V3 with the biggest being to the control knob. The V3 won't be offered in the US.

expert reply by: Conner L

1

Answer 1

For your 2022 Subaru Forester, we have the EcoHitch Hidden Trailer Hitch Receiver #306-X7391 that will fit all models of the Subaru Forester Wilderness. This hitch has a maximum GTW of 3,500-lbs and a maximum tongue weight of 525-lbs. When…

view full answer...

Answer 2

The EcoHitch part #306-X7391 that you referenced was confirmed as a fit for your 2022 Subaru Forester Wilderness Edition and is the most hidden option so it would be the way to go. We also have confirmed that the Curt hitch #C13409 does fit the…

view full answer...

Answer 3

To get both of the 2021 Subaru Outbacks pulling the Safari Condo F1743, you would need to purchase two of the #ETBC7 kits. They would piggy back off of the existing 4 pin connections already on the vehicles, so you are already partially there. I…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 10

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 11

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Is the Redarc V3 Tow-Pro Elite Trailer Brake Controller Available In the USA

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching