Does Installing Front Mount Eco Hitch Require Moving Transmission Cooler Lines?

Question

Question:

So I won’t have to move any transmission lines for the diesel

asked by: Randy

0

Expert Reply:

I spoke with the manufacturer and you move lines to fit the hitch in but there is no relocation or changing of transmission cooler lines to get part # 306-X7904 installed on your 2017 F-350.

expert reply by: Clayton O

0

Answer 1

I do have an option for you but the EcoHitch Hidden Front Mount Trailer Hitch Receiver part #306-X7904 is not a confirmed fit for a 2022 Ford F-350 Dually. The dually models have an auxiliary cooler mounted in the way which does not allow this…

view full answer...

Answer 2

This installation requires that you remove the front bumper because the hitch receiver is completely hidden once it is installed. You will not see the cross tube for this hitch receiver, at all, when looking at the front of your 2019 Ford F-250. In…

view full answer...

Answer 3

Towing your Jeep Wrangler TJ behind your motorhome requires a tow bar, a kit to connect the tow bar to the Jeep, a lighting solution, and a braking system. You also may need a way to maintain the Jeep's battery while towing and a high-low adapter…

view full answer...

Answer 4

The EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #306-X7904 is a fit with your truck and its components because the hitch does not reach past your sensors. The accessory you use in the hitch will likely cause issues with…

view full answer...

Answer 5

There is no longer an exclusion for the diesel engines of 2019 Ford F-250 in regards to the fit of the EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7904. At one point this hitch did not fit the models of this truck that had diesel…

view full answer...

Answer 6

According to EcoHitch, their #306-X7904 front mounted receiver is indeed a fit for the 2020 Ford F-250. The hitch does sit very nicely in the split on the front bumper, and therefore has a clean look that won't affect ground clearance or the…

view full answer...

Answer 7

I reached out to EcoHitch and they have not had any report issues when moving the cooler on a 2019 Ford F-250 to install the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #306-X7904. The included brackets do not move the…

view full answer...

Answer 8

The EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7904 will require you to use the supplied relocation brackets and move the transmission fluid exchanger. You will open the transmission oil line retainer clip, mount the relocation brackets…

view full answer...

Answer 9

I attached a picture that shows the install instructions for the Demco capture plate adapter part #DM6171 for you to check out. You do have to remove the old screws to get the old plates off to install this kit.

view full answer...

Answer 10

I checked with the manufacturer, who said that these particular locking plates could work with a standard OEM pin box. They are longer and taller than the locking plates that come with a standard hitch and are designed specifically for the Trailair…

view full answer...

Answer 11

If you have destroyed the tail gate on your truck then something is definitely amiss; there is going to be some play in the hitch, but not to the point where a part of your truck would be ruined. You did not specify the hitch you used, but you would…

view full answer...

Answer 12

I had our warehouse measure the Demco Hijacker Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 you were looking at and it is 10-1/4" long x 1-1/2" tall as shown in the included diagram. The #DM6171 is needed when using the…

view full answer...

Does Installing Front Mount Eco Hitch Require Moving Transmission Cooler Lines?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching