Picking Out Replacement Cylinder for Slide Out of Springdale Clearwater 249BH

Question

Question:

I need to replace the cylinder on my slide out. Its a 2001 Springdale /clearwater 249bh. I believe the above referenced cylinder matches the measurements on the existing cylinder. just wanna make sure its right.

asked by: Timothy W

0

Expert Reply:

If the hydraulic cylinder you have is an LCI and it matches the dimensions of the # LC342328 below this is the correct replacement:

Port to port length: 41"
Overall tube length: 42-1/16"
Overall length (retracted): 53-1/8"
Stroke: 38"
Bore: 1-1/2"

expert reply by: Jameson C

0

Answer 1

There is no way for me to know if Item #LC342328 is compatible. In order to get the correct hydraulic cylinder for your 2005 Gulf Stream Sun Voyager you would need to measure from the center of one port to the center of the other port on your current…

view full answer...

Answer 2

Manufacturers don't list the parts that they use on their trailers so you'll need to measure the distance from the center of the port to center of the other port (pictured below) to determine the correct replacement. For example the Lippert…

view full answer...

Answer 3

The closest hydraulic cylinder we have to the measurements you provided is the Lippert Replacement Hydraulic Cylinder for RV Slide-Out #LC342328. The Lippert Replacement Hydraulic Cylinder for RV Slide-Out #LC342328 has the same stroke at 38"and…

view full answer...

Answer 4

We do indeed offer the replacement hydraulic actuating RV slide-out cylinders you're needing. For the cylinder measuring 39.5 between the ports, use #LC342328. For the cylinder measuring 31.5 between the ports, use #LC42FR. The #LC42FR is white…

view full answer...

Answer 5

I checked with Lippert and they told me that the correct replacement for you is the Lippert Replacement Hydraulic Cylinder for RV Slide-Out part #LC342328 which has a port to port of 39-1/2", a retracted overall length of 53", and a tube…

view full answer...

Answer 6

The best match we have for your hydraulic bed cradle slide-out system is the Lippert Replacement Hydraulic Cylinder for RV Slide-Out part #LC339031 which has an extended length of 63" and a retracted length of 39" which you can see from the…

view full answer...

Answer 7

I found Lippert Replacement Hydraulic Cylinder #LC342328. Its Port to port length is 41", Overall tube length is 42-1/16", Overall length (retracted) is 53-1/8" and Stroke is 38". Please check this against what you have and see…

view full answer...

Answer 8

It sounds like you are looking for a replacement hydraulic cylinder for a slide-out. If that is the case then the closest match we have to the information provided is the Lippert Replacement Hydraulic Cylinder for RV Slide-Out part #LC42FR which…

view full answer...

Answer 9

To find the correct replacement Hydraulic Cylinder for the slide out of the 2017 Forest River XLR Thunderbolt you'll need to measure the distance from the center of the port to the center of the other port. Since you measured 32" I'm…

view full answer...

Answer 10

I spoke to my contact at Lippert and he told me the correct hydraulic cylinder replacement for your 2009 Keystone Challenger Fifth Wheel is the Lippert Replacement Hydraulic Cylinder for RV Slide-Out - 53" Long #LC342328.

view full answer...

Answer 11

Thank you so much for all the information, it definitely helps when doing research. The correct cylinder for the slide out for your 1993 Komfort 5th wheel is Lippert Replacement Hydraulic Cylinder for RV Slide-Out #LC342328. Based off of all the…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Picking Out Replacement Cylinder for Slide Out of Springdale Clearwater 249BH

Product Page this Question was Asked From

Continue Researching