Can Camco Cover and Base for RV Propane Tanks both Install at Same Time

Question

Question:

Would this Camco Base fit underneath this Camco Cover? I have a flat platform that I wanted to put the base on then cover with the Camco as a clean unit. Cover: Camco RV Polyethylene Propane Tank Cover for 1 20-lb Steel Tank - Black Item # CAM40565

asked by: Keith

0

Expert Reply:

The Camco Cover part # CAM40565 and the base part # CAM57236 both can't install at the same time. You'd have to decide which of these two you'd want to use. Basically there isn't room in the cover for the base to also fit.

expert reply by: Jameson C

0

Answer 1

We do offer a replacement lid for Camco RV polyethylene propane tank covers like #CAM40565 that fits a single 20-lb tank. The replacement lid is part #CAM40567. The lid is black and measures approximately 12 x 5-inches. This lid is specific to this…

view full answer...

Answer 2

The Camco RV and Marine Mini Dishpan, part #CAM43515 is designed to fit an RV sink that measures 10-1/2 x 12-3/4 inches. The lip of the dishpan will sit on the top edge of the sink. The dishpan is tapered and the dimension of the bottom is 8-1/4 x…

view full answer...

Answer 3

Thank you for reaching out! I've heard about the issues with the Dometic 300 toilets in the past and I completely understand your concerns. With that being said, the Dometic 300 Weekender RV Toilet - White #DOM64FR or Tan #DOM74FR were…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 6

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi Tom, I have two options to replace the electric tongue jack on your Jayco Whitehawk: Option 1: Electric Jack w/ Footplate #EJ-3520-BBX. This jack is going to be your no-frills 'get the job done' style jack. It has a 3,500lb capacity and…

view full answer...

Answer 9

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 10

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...