Replacement Ceiling Garnish Trim for Inside Roof Vent

Question

Question:

Howdy! I am looking for a Fantastic Fan Trim ring with a wider ring. In this picture they make reference to it being a European Version attached at the pictures for reference. Have you seen anything like this, or can you point me to something that is wider? Thank you!

asked by: Brian O

0

Expert Reply:

The trim ring you are referencing is called a ceiling garnish. There are different colors and different depths with the ability to cut them to custom height. I've linked the page to your options to assist. All of them are 1-1/2 inches on each side of the vent typically 16 inches square from edge to edge.

expert reply by: Jason S

0

click to enlarge

Answer 1

I attached a picture that shows the inside corners of the Ceiling Garnish #FVK1060-81 that you referenced to show you how round or square they are.

view full answer...

Answer 2

Essentially you need to measure the height of the garnish from above the lip to the very top. If you can't find one that fits exactly you can get a garnish that's too large and cut it down to size.

view full answer...

Answer 3

Thank you for reaching out and providing your photos! The correct replacement lid for your Dometic FV1250 roof vent is the Replacement Flat Lid for Dometic Fan-Tastic Roof Vent - Smoke #DMC66FR which I confirmed with my contact at Dometic.

view full answer...

Answer 4

Here are the inner and outer dimensions for the Camco Gen-Turi items you asked about. Part #CAM44872 – OD is 2.94 inches and ID on the small end is 2.69 inches. Part #CAM44862 – OD is 1.51 inches and ID is 1.25 inches on the flared end. No…

view full answer...

Answer 5

Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard…

view full answer...

Answer 6

From what I have found, the replacement for the AL-KO 7230 hub and drum assembly is the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased #AKHD-545-35-K. For brakes, I recommend the Electric Trailer…

view full answer...

Answer 7

You can indeed test a trailer's electric drum brakes by directly applying +12V power from a fully-charged battery. You can apply this power to the hot and ground contacts on the trailer's plug (see photo please) or to an individual…

view full answer...

Answer 8

I have included an image with the measurements for the opening and mounting holes on the Black Trim Kit #Trim-BL-FR03. You will need to compare these with your Panasonic Microwave as we do not have one here to verify all the measurements to ensure…

view full answer...

Answer 9

The garnish of the Fan-Tastic roof vent you have part #FV802250 is 4-1/2 inches tall but we do offer taller garnishes like the part #FVK1060-81 which is 6 inches tall and can be cut down shorter as needed.

view full answer...

Answer 10

I reached out to my contact at Fan-Tastic Vent and he said that if your model 1200 roof vent is under 5 years old then they know for a fact that the Ceiling Garnish #FVK1060-81 will fit. The company who previously owned Fan-Tastic Vent…

view full answer...

Answer 11

Most likely there is some old grease inside the bolt that's clogging things up. You can raise the trailer up and remove the wet bolt in question to give it a thorough cleaning or just simply replace the bolt altogether. Unfortunately…

view full answer...

Answer 12

It really shouldn't matter what direction the wet bolts part #126B2 install when used for equalizers or shackle straps. But if Dexter says to install them in the orientation you described then I would recommend you stick with their…

view full answer...

Replacement Ceiling Garnish Trim for Inside Roof Vent

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching