Recommended Cutting Board For Furion RV Range Top

Question

Question:

Is there a cutting board that will fit on top of the glass top? It would have to have soft riser pads to get it above the hinges. We of course couldn’t leave it on while cooking or traveling

asked by: Steve N

0

Expert Reply:

The Camco RV Universal Fit Stovetop Silencer and Countertop w/ Flexible Cutting Mat - Solid Oak # CAM43521, Bordeaux # CAM43526, or white # CAM43707 are the best options for what you are seeking. I wouldn't recommend putting them on the glass as that hasn't been tested but this will allow you to use the space you are missing and redeem it as counter space.

expert reply by: Jason S

0

Answer 1

The Furrion RV Cooktop with Glass Cover - Propane - Triple Burner - Black #FGH3Z25BL does not have the replacement glass option. You can use the Replacement Hinge for Furrion 2-in-1 Range Oven - Qty 1 #LC719851 but you will need to get tempered glass…

view full answer...

Answer 2

The only way Furrion offers us a replacement glass top for the Furrion stove #FGH3Z25BL is with the drip pan as well with part #C-FSRE21SA-SS-003. This installs much easier than if just the glass covers were available separately!

view full answer...

Answer 3

If you have a broken glass cover on your Furrion Range Oven part #FGH3Z25BL the replacement solution is the part #C-FSRE21SA-SS-003 which replaces easily once hardware of the top is removed from the stove.

view full answer...

Answer 4

We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…

view full answer...

Answer 5

The bluetooth set up for your Jensen RV Stereo part #JWM70A can be a little tricky with out the instructions to act as a guide. I have attached those here for you to check out. Simply walk through the steps and you will be paired in no time. Happy…

view full answer...

Answer 6

Based off of the information you have provided, it sounds like you are looking for a couple replacement keys for a Southco Slam Latch made by Lippert. You will want the Replacement Keys for Lippert Slam Latch Baggage Door Handle item #LC230012. This…

view full answer...

Answer 7

There are adapters on the market that can go from a cigarette lighter style plug that the #C-FOS07TAPK-006 has to USB/USB-C ports but we don't currently offer any so the only solution I can provide is the #RM-9332. This is a replacement outlet…

view full answer...

Answer 8

Thank you for the photos! To replace your old Lippert (LCI) slam latch you can use the Lippert Standard Baggage Door Latch Kit - Black #LC317649, which is going to be the same size as your old slam latch and will fit perfectly in the existing cutout…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...