Fit of Dexter K71-652-00 E-Z Flex Suspension Kit  

Finding the correct MORryde equalizer kit will be pretty specific, so I cannot tell you which will be correct without knowing the wheel spacing and axle capacity, unfortunately. With that being said, if you have the trailer's VIN, you may be…

The MORryde CRE3000 Rubber Equalizers are a great upgraded equalizer option for any trailer. They are cushioned so they will do a great job of absorbing road shock and providing a smoother ride. In order to choose the correct ones you'll need…

Yes, the blue and yellow paint jobs are completely meaningless when it comes to the performance of the Road Armor Shock Absorbing Equalizer Kit #LC696740. The important thing is to make sure that the measurements are the same so that your system…

Both the MORryde Rubber Equalizers #MR87ZR and Dexter E-Z Flex Suspension Kit #K71-652-00 are achieving the same result. They are doing so with slightly different designs but end up with the same result. I recommend using the Dexter E-Z Flex…

Since your axle spacing looks to be right at 32-1/2 inches the Dexter EZ Flex kit part #K71-652-00 is the correct fit and would work great. This will work great on your 2011 Marine Master Boat Trailer. We don't have a K71-652-06 kit so we do…

It sounds like your trailer isn't sitting totally level when hooked up to your tow vehicle. Does the front of the trailer sit higher than the rear? Judging by the angle of the equalizer in the picture you sent me it looks to be nose high. If so,…

If the shackle straps are within a 1/2" of what you normally had, say the 2-5/8" #115052 to 3-1/8" #TRSL313, you should be okay to install them. Just make sure that all of your shackle straps match though. If you are using the longer…

The correct replacement equalizer for your 13-104 is TruRyde Curved Equalizer #TREQ104. If you need the kit, you can use the Redline Tandem-Axle Trailer Equalizer Kit #AP233. The upgrade we offer for the 13-104 equalizer is the Dexter E-Z Flex Heavy…

As long as you use a qualified fabricator with trailer suspension experience you could have him weld in a spacer between your hangers so that they sit lower. Or you could install taller hangers to make up the difference. This would be the route I…

We get the best feedback on the EZ Flex systems like the part #K71-652-00 that you referenced. Based on the dimension of the equalizer in the picture you submitted this #K71-652-00 is the correct replacement and would work well for you. I attached an…

Thanks for the pictures! If you're getting that loud of noise out of your 2019 Jayco Eagle Fifth Wheel's equalizers then it is time to replace them. Greasing them won't fix that loud clunking noise. If your axles are 35" on center…

To slightly lower your trailer that has had an "axle flip" kit installed you would want to use slightly shorter shackle straps, not longer ones. Shorter shackles will let the axle rest closer to the trailer frame, which lowers the trailer…