Plunger Pin Replacement for a Shelby Model 5856A Trailer Jack

Question

Question:

I Have a Shelby Model 5856A 1000 lb Trailer Jack and need a replacement plunger pin with 1/2inch pin dia.. I see you have several- will the PLGPIN-12 work on this jack or do I need to go to the DL 22454. There is a price difference and want to get the one that at lowest cost. I gotten stuff from you before - always great service! Thanks

asked by: Chuck P

0

Expert Reply:

To replace your plunger pin on your Shelby Jack I recommend Replacement Swivel Pin Kit for Trailer Jacks
Item # DL22454. As long as your pin is 1/2" diameter this kit can replace your current pin.

expert reply by: Shane H

0

Answer 1

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs, since you are looking for 5 on 4-1/2 inch bolt pattern…

view full answer...

Answer 2

It is possible the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301 will fit the same mount used by your Shelby 5776 jack but we do not have the exact dimensions of the mount used by your Shelby jack so you will need to take a quick…

view full answer...

Answer 3

To replace your Shelby 5856A jack I recommend the Fulton Round Snap-Ring Swivel Marine Jack #FTJ120W0301. We have had customers say that this fits the mounting plate for the Shelby 5784A perfectly so ti's going to be the easiest install possible.…

view full answer...

Answer 4

I do have a solution for you, however replacement parts for your Shelby 5854A Trailer Jack are no longer available. I recommend simply replacing your Shelby jack with a similar unit like the Fulton Bolt-Thru Swivel Trailer Jack #FXPD15L. This zinc…

view full answer...

Answer 5

The Replacement Plunger Pin Assembly for etrailer and Ram Jacks #PLGPIN-12 has a 1/2" diameter, measures 5" long, and the straight part measures 2-1/2" (see attached photo). We used to carry the Shelby jacks back in the day when they…

view full answer...

Answer 6

Since Shelby is no longer in business, and jack handles are not universal, what that means is there isn't a replacement handle available, so your only option is to get a brand new jack. Since the Shelby is a weld-on jack, the best option we have…

view full answer...

Answer 7

The plunger pins are usually specific to the brand of jack and usually are not interchangeable. Unfortunately, without knowing the manufacturer and model number of your existing jack, I cannot say with certainty that the pin will work for you. I have…

view full answer...

Answer 8

We do not carry the jack you are needing a replacement part for. The closest pin we have to what you are describing is the Replacement Plunger Pin Assembly for etrailer and Ram Jacks #PLGPIN-12 which is 1/2" diameter, a total of 5" long and…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

While the #RR25AB is a fit for 2500 Series Legs, like your roof rack system uses it's unfortunately not a fit for your vehicle. I spoke with Rhino-Rack to try to find the rest of the pads and was unfortunately told that the other pads aren't…

view full answer...

Answer 12

Hello Tim. We can definitely set you up with a complete AC system with an Advent low profile unit. We currently do not offer these parts as a package, but you can purchase all of the exact same components separately. To answer your question, yes, the…

view full answer...

Plunger Pin Replacement for a Shelby Model 5856A Trailer Jack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching