Wiring 2012 Cadillac SRX so that Third Brake Light Operates While Flat Towing
Question:
I ordered from you, a diode wiring kit for my Cad. I have wired cars before,but I cant find the wire for the center stop light. I would like to have the center stop light work if possible. It does not seam to be connected to the right or left brake light wires. Do you have any ideas that might help? Thanks
asked by: Michael B
Expert Reply:
Although it is not required by law, you can indeed tie in the third brake lamp so that it operates when your SRX is connected to the motorhome. You will need an additional diode, part # RM-790 to prevent backfeed into the SRX. The diode would be wired as shown in the diagram I have produced for you.
I have looked online and have not been able to find any information regarding the location of the wiring harness that feeds the third brake light. Your best bet would be to check behind the trim panels behind the C pillar, looking for a wiring harness that runs up the inside and up under the headliner. Use a circuit tester like part # PTW2993 to ensure you have the correct wire. Trace the wire back down behind the side trim panels, which would be a good spot to install the extra diode shown in the diagram. I wish I had more specific information for you.
Products Referenced in This Question
Roadmaster Hy-Power Diode - (Qty 1)
- Accessories and Parts
- Tow Bar Wiring
- Diodes
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Article: Trailer Wiring Diagrams
- Shop: Vehicle Tow Bar Brake System
- Shop: Trailer Wiring
- Video: Blue Ox Tow Bar Wiring Kit Installation - 2016 Cadillac SRX
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Pole Flat Connectors
- Shop: Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
- Shop: Blue Ox Tow Bar Wiring Kit
- Shop: Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
- Shop: Tail Light Isolating Diode System with Wiring Harness
- Shop: Blue Ox 4-Diode Universal Tail Light Wiring Kit for Towed Vehicles
- Shop: Curt Trailer Connector Adapter - 7-Way RV Style to 5-Way Flat - 60" Cord
- Q&A: Installing Battery Charge Line for Flat Towed Vehicle with 4-Way Connector
- Q&A: How To Hook Up Battery Charge Line On RV and Towed Vehicle
- Q&A: Difference Between 205/65-10 and 20.5 x 8-10 Trailer Tire Sizes
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch wiring
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer hitch
- Shop: Base Plate for Tow Bar
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: base plates
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
on Tow Bar Wiring
