Recommended Replacement Mounting Hardware for Thule Cascade XT Cargo Box

Question

Question:

Hi, Im looking for a replacement U bolt for Thule Cascade XT box. Any ideas?

asked by: Mark D

0

Expert Reply:

To replace the mounting hardware on your Thule Cascade cargo box, you will need the Thule quick mount hardware # TH04997. This won't be the original U-bolts, but it will work in the same way. I've attached a photo that shows how it works.

expert reply by: Erik B

0

click to enlarge

Answer 1

Yes, you can use u-bolt #TH02943 with your Sears Sport 20 SV cargo box. Or, if you wanted to, you can use replacement hardware kit #TH05603 to replace all of the hardware or to have some extra parts on hand should you need them.

view full answer...

Answer 2

Thank you so much for the info and pictures! The correct replacement key for your lock for is part #THKEYN2982 and the correct replacement mounting hardware is part #TH05603. The mounting hardware does look a little different than the original…

view full answer...

Answer 3

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. I included a video…

view full answer...

Answer 4

It sounds like you already have a roof rack with round crossbars for your 2018 Chevy Cruze; your Sears X-Cargo Sport 20 cargo box will mount directly to those with the standard mounting hardware. If you need to replace the standard mounting…

view full answer...

Answer 5

The bolt to bolt spacing on the Replacement U-Bolt for the Thule Sidekick item #TH02943 is 4". It is 2" deep overall. I have linked a diagram below that will show you these measurements and a couple more. They are different…

view full answer...

Answer 6

You were on the right track; the Replacement Hardware Kit for Sears Cargo Boxes #TH05603 is the correct mounting hardware that you'll need to attach your Sears cargo box to the factory bars on a 2019 Subaru Forester. This is a U-bolt kit…

view full answer...

Answer 7

The fuses for the 7-way trailer connector on your 2013 Ford F-150 are in the power distribution center as follows: Trailer Tow Brake Control #17 30 Amp Fuse Trailer Tow Battery Charge #21 20 Amp Fuse Trailer Tow Back-Up Lamp #43 15 Amp Fuse Trailer…

view full answer...

Answer 8

Since the trailer connector on your 2013 Ford F-150 is no longer sending power to the turn signal circuits on your trailer you will need to replace fuse #73. This 20-amp fuse is located in the engine bay fuse box and is what sends power to the…

view full answer...

Answer 9

The U-bolt replacement you are in need of is the part #TH02943 for your Sears X-Cargo box.

view full answer...

Answer 10

According to Thule, who manufactured that box, the mounting holes in the underside of that box should be about 4 inches apart. If that's indeed the case, the #TH02943 would be the correct U-bolt.

view full answer...