Mounting Brackets for Fulton Plastic Trailer Fenders

Question

Question:

Do you have the mounting hardware so I can mount it to my trailer? Please provide details, part numbers and does my trailer have to be a certain make or model. Thanks

asked by: Charles

0

Expert Reply:

The Fulton trailer fenders # F008584-2 do not come with mounting hardware but you can either use existing hardware or we have brackets # CE26098G-2. You may need 2 sets of these (1 set per fender) depending on where you will be able to mount them. You do not have to have a specific make or model trailer to use the fenders or brackets.

expert reply by: Michael H

0

Answer 1

The best option we'd have to replace the fenders on your trailer would be the Fulton Single Axle Trailer Fenders with Top and Side Steps part #F008584-2. The measurements we have for this fender appear to be very similar to that of the brackets…

view full answer...

Answer 2

It sounds like you are looking for the EZ-LOADER Gray Plastic Fender for 13" Tires, w/Cutout part 5291132 and 5291131. These are made for 13" tires and have a marker light cutout. The closest thing I have is the CE Smith Single Axle Trailer…

view full answer...

Answer 3

Based on your measurement and image it appears you will need the Fulton Single Axle Trailer Fenders with Top and Side Steps which we have in Black #F008584-2 or Silver #F008594-2. These fenders separate the side mounting holes 30-1/4" from front…

view full answer...

Answer 4

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The closest radial tire size I would have to replace the 4.80-12 bias tire size is the Kenda Karrier S-Trail ST145R12 Radial Trailer Tire #AM10130. The 4.80-12 bias tire is 20.7 inches tall and 4.9 inches wide. The 145R12 radial tire is 21.3 inches…

view full answer...

Answer 8

The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B #AM30590 have a max speed of 65 mph. When trailer tires are not speed rated with a letter, the default is 65 mph max. I've attached an article to…

view full answer...

Answer 9

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…

view full answer...

Answer 10

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda 205/65-10…

view full answer...

Mounting Brackets for Fulton Plastic Trailer Fenders

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching